ZK2000-2122-0030 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
34 Seconds
The Beckhoff ZK2000-2122-0030 is a motor cable from the ZK Motor Cables series with a 3 meter length and IP67 protection class. It features an M8 straight plug and socket, 3-pin configuration, and is rated for 4 Amps at 40°C and 60 Volts. The cable is suitable for drag-chain use, has a black PUR jacket, and a cross section of 3 x 0.25 mm².
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK2000-2122-0030 cable is produced by Beckhoff within the ZK Motor Cables series. It is a pre-assembled motor supply lead intended for drive and automation installations where compact M8 interfaces are required. By providing a sealed, factory-terminated path for low-voltage power distribution between servomotors and decentralized modules, the assembly reduces manual wiring work and helps maintain consistent electrical performance during continuous machine operation. Its compact format also suits distributed motion hardware mounted close to moving axes, where short and orderly cable runs help keep routing clear.
The cable measures 3.00 m from plug to socket, giving practical reach for cabinet-to-axis layouts without adding unnecessary slack. Its power conductors have a cross section of 3 x 0.25 mm² (AWG 24) and use a fine-strand 32 × 0.10 mm construction, which helps the cable remain flexible during installation and repeated movement. The assembly carries 4 A at 40 °C, making it suitable for low-voltage motor power distribution in compact automation systems. A nominal system voltage of 60 V matches EL and AX series applications that operate on extra-low-voltage DC links. The polypropylene insulation and black polyurethane jacket add durability against abrasion while keeping the outside profile small, and the mated connectors provide IP67 protection against dust and temporary water exposure.
An overall diameter of 4.4 mm ± 0.15 mm supports dense cable bundle placement in space-limited machine areas. The recommended connector tightening torque of 0.4 Nm helps secure the metal coupling threads without overstressing the overmold. Pin assignment follows the A-Coded M8 standard, so the connector layout matches common Beckhoff servo module interfaces. The straight male plug at head A connects to the motor, while the straight female socket at head B connects to the control side. The cable is suitable for drag-chain use, and its unshielded design fits installations where low-voltage power lines are routed separately from feedback circuits.
