ZK1096-9191-0300 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Beckhoff ZK1096-9191-0300 is part of the ZK Motor Cables series and features a cable diameter of 6.2 mm and a length of 30 meters. This cable uses an S/FTP structure, has a PUR jacket, and supports a rated current of 1 amp at 50°C. It includes an RJ45 male 8-pin connector rated for 160 volts and has a minimum bend radius of four times the outer cable diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK1096-9191-0300 is a pre-assembled motor cable manufactured by Beckhoff and supplied within the ZK Motor Cables series. It combines a shielded twisted-pair structure with an RJ45 plug so that drive controllers or I/O modules can exchange control signals and auxiliary power with field devices over a single assembly. Within industrial automation layouts, the cable’s purpose is to provide deterministic data transmission and limited current feed while remaining flexible enough for cabinet routing or moving-axis installations.
The assembly is delivered in a fixed length of 30.00 m, providing a predictable run for interconnecting distributed components without splicing. Its conductor set follows a 4 x 2 x 0.14 mm² (AWG26) geometry, meaning eight finely stranded cores that minimize bulk yet support balanced signaling. Signal integrity over that span is aided by a characteristic impedance of 100 Ω ± 15 Ω (100 MHz), which matches common Ethernet-based fieldbuses and keeps reflections low. Each core may carry up to 1 A at 50 °C, enough for sensor supply lines or other low-power auxiliary circuits, and the copper loop resistance stays at ≤ 290 Ω/km, limiting voltage drop over long runs. A foil-plus-braid S/FTP design, a PUR jacket, and a minimum bend radius of four times the outer diameter support dynamic routing in drag chains while maintaining shielding continuity.
The overall diameter is held to 6.2 mm ± 0.2 mm, so cable trays or PG glands can be selected with minimal clearance. Long-term insulation quality is indicated by a resistance of ≥ 150 MΩ·km, reducing leakage paths even when exposed to coolant mist or humidity. The RJ45 connector is rated for 160 V, allowing installation alongside mixed-voltage wiring without overstressing the plug dielectric. Electromagnetic compatibility is further improved by a shield coverage of ≥ 60 %, while mutual capacitance of 46 pF/m and a signal delay of 4.27 ns/m support deterministic timing. A stated minimum of 750 mating cycles supports frequent maintenance disconnects.
