ZK1096-9191-0150 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK1096-9191-0150 is part of the ZK Motor Cables series and features a Cat.6A S/FTP structure with RJ45 male connectors on both ends. This 15 meter cable uses a polyurethane jacket, offers 8-pin connector positions, and has a characteristic impedance of 100 ohms ± 15 ohms. It supports a plug rated current of 1 amp at 50 degrees Celsius and a rated voltage of 160 volts, with an IP20 protection rating.
Internal Product Review
The ZK1096-9191-0150 is a Beckhoff ZK motor cable with Cat.6A performance and RJ45 male to RJ45 male termination. S/FTP cable structure and a PUR jacket give the assembly strong signal discipline and dependable service in industrial routing. IP20 protection and 100 Ω characteristic impedance make this cable a solid choice for stable cabinet-level connectivity.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK1096-9191-0150 is a Beckhoff ZK Motor Cables series assembly that links a drive controller to a servomotor through an Ethernet-based connection. Two pre-molded RJ45 male plugs remove the need for field termination, providing consistent signal transmission and limited auxiliary current through one cable. The assembly is intended for cabinet runs or moderate movement in drag chains used on machine tools, packaging lines, and palletizers. Its construction suits applications where one cable must carry real-time communication along with low-power auxiliary functions. This layout helps keep machine-side wiring compact and reduces the chance of pinout errors during installation.
The data pair is rated as Cat.6A, so it supports 10 Gigabit Ethernet traffic at frequencies up to 500 MHz. A differential impedance of 100 Ω ± 15 Ω helps control reflections, while the factory-set length of 15.00 m establishes the expected attenuation across the run. Routing is simplified by the slim 6.2 mm sheath and by flexible 7-strand conductors inside an S/FTP shield that reduces crosstalk between pairs. Each plug has eight gold-plated contacts matched to 8-pin panel jacks and the 4 × 2 × 0.14 mm² twisted-pair layout, and the PUR jacket resists oils and weld spatter while the contacts can carry up to 1 A at 50°C for low-power auxiliary functions.
The connectors are rated for 160 V low-voltage circuits, and signal travel remains predictable with a propagation delay of 4.27 ns/m. Together with a mutual capacitance of 46 pF/m at 1 kHz, these values support stable timing behavior in motion networks that depend on consistent communication. The assembly has an ingress rating of IP20, so it is intended for protected cabinet areas and needs added protection where liquids or metal chips are present. With a mass of 41 kg/km, the cable adds relatively little load to moving carriers, and the sheath remains flexible through repeated bends.
