ZK1090-9191-6200 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK1090-9191-6200 motor cable is part of the ZK Motor Cables series and has a length of 20 meters with a structure of 4 x 2 x AWG26 conductors. It features a rated voltage of 60 V for the cable and 160 V for the plug, and supports plug rated current up to 1 ampere at 50 degrees Celsius. The cable offers an insulation resistance of at least 5000 megaohms per kilometer and supports a minimum of 750 mating cycles.
Internal Product Review
The ZK1090-9191-6200 is a Beckhoff motor cable with an 8-pin configuration and a 20 m cable length for efficient machine integration. A 5000 MΩ/km minimum insulation resistance and 1500 V DC wire-to-shield dielectric strength support stable signal integrity and dependable service in motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK1090-9191-6200 is a preassembled motor connection cable in the ZK Motor Cables series. It carries power and feedback signals between an axis controller and a servo motor, allowing decentralized drives to be linked quickly during machine assembly and maintenance. This model uses field-installable circular connectors at each end, which helps simplify routing inside cabinets and through moving cable chains. The preassembled format also reduces the need for separate termination work at the installation site.
The cable is supplied in a fixed length of 20.00 m, which suits medium runs between drive modules and motors on typical production lines. Its internal layout follows a 4 × 2 × AWG26 structure, using four twisted pairs to minimize crosstalk and support differential encoder signals. Each conductor has a cross-section of 0.14 mm², balancing flexibility with the electrical demands of signal transmission in drag-chain applications. The shielded core has a ground capacitance of 1600 pF/km, which helps characterize the reactive load seen by high-speed outputs. A rated voltage of 60 V covers typical low-voltage motor brakes and sensors, while an insulation resistance of 5000 MΩ/km keeps leakage current very low. Electrical isolation is supported by a wire-to-shield dielectric strength of 1500 V DC, a wire-to-wire dielectric strength of 1000 V DC, and a loop resistance of 280 Ω/km.
Its circular connectors are keyed for 8-pin interfaces, and the contact set withstands at least 750 mating cycles for repeated connection and disconnection. Data integrity is supported by a mutual capacitance of 51 pF/m at 1 kHz and a signal propagation delay of 5.08 ns/m, which helps maintain stable timing on encoder and communication lines. The plug side supports control supply potentials up to 160 V and continuous currents of 1 A at 50 °C, while plug insulation resistance remains above 10 GΩ to limit surface leakage. These values suit applications that need reliable signal transfer together with compact circular interconnections.
