ZK1090-9191-0100 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK1090-9191-0100 is a motor cable from the ZK Motor Cables series with a length of 10 meters and a structure of 4 x 2 x AWG26. It features a polyurethane jacket, rated voltage of 60 V for the cable, 160 V for the plug, and has an 8-pin configuration. The cable supports a rated current of 1 A at 50°C and offers shield coverage of 90 percent.
Internal Product Review
The ZK1090-9191-0100 is a Beckhoff motor cable with a PUR jacket and 90% shield coverage. The 8-pin configuration and 4 x 2 x AWG26 cable structure support clean transmission and dependable integration in motion-control wiring. Wire/shield dielectric strength up to 1500 V DC is a strong technical advantage for demanding industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK1090-9191-0100 is a motor and feedback cable produced by Beckhoff within the ZK Motor Cables series. It forms the fixed link between an EtherCAT drive controller and a synchronous motor, carrying both power and high-speed differential signals so that motion axes in an automation cell can be energized and monitored with a single hybrid lead. This arrangement lets the drive deliver motor current while receiving the feedback signals needed for closed-loop motion. By combining these functions in one assembly, it helps keep cable routing straightforward where a compact connection between the drive and motor is required.
The assembly is supplied in a factory-terminated length of 10.00 m, allowing direct routing from cabinet to machine without splices. A rated voltage of 60 V matches the low-voltage DC bus used in compact servo stages, while the device-end plug tolerates back-EMF transients up to 160 V. The conductors use a 4 x 2 x AWG26 layout, and each twisted pair provides 0.14 mm² of copper with a loop resistance of 280 Ω/km. Signal timing is supported by a propagation delay of 5.08 ns/m, which helps keep phase relationships predictable over the full run. Shielding is provided by braid and foil with 90 % coverage, and the 8-pin coding matches Beckhoff One Cable Technology connectors for the intended interface.
The cable carries up to 1 A at 50 °C, which is suitable for resolver, brake, and sensor feeds that accompany the motor phases. Its outer jacket is PUR (polyurethane), selected for oil resistance and repeated flexing in moving cable applications. Polyethylene insulation supports a wire-to-shield dielectric withstand of 1500 V DC, while the wire-to-wire rating is 1000 V DC. The mutual capacitance is 51 pF/m at 1 kHz, and the to-ground capacitance is 1600 pF/km, which helps limit crosstalk during signal transmission.
