ZK1090-6191-4030 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK1090-6191-4030 is part of the ZK Motor Cables series and features a 3 meter length with a PUR jacket. The cable has an M12 D-coded connector on one end and an RJ45 8-pin connector on the other, with a star quad structure and tinned copper conductors. It supports up to 20 million drag-chain cycles and has a loop resistance of 250 Ohms per kilometer.
Internal Product Review
The ZK1090-6191-4030 is a Beckhoff motor cable built with a star quad structure and tinned copper conductors. An M12 connector on Head A and an RJ45 connector on Head B support clean, dependable integration across industrial connections. A PUR jacket and a 20 million drag-chain cycle rating make the cable an excellent choice for continuous motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK1090-6191-4030 cable is manufactured by Beckhoff as part of the ZK Motor Cables series. This pre-assembled lead links servo drives, distributed I/O, or sensors to control hardware and is delivered with factory-fitted connectors to streamline panel wiring on automated equipment. Within an installation it carries both power and Ethernet-class signals between moving axes and stationary cabinets while remaining suitable for continuous flexing in energy-chain routing. By combining signal integrity with mechanical durability, the product supports precise motion control in high-cycle production environments.
Its conductor set is a single star-quad of 1 x 4 x 0.14 mm² (AWG26), meaning four identical cores are twisted together to stabilize impedance. This geometry, specified as a star quad, gives each pair the same electrical length and minimizes crosstalk. Current travels through tinned copper strands that resist oxidation and simplify termination. On the motor side the cable ends in a D-coded industrial Ethernet interface within an M12 plug; this pairing supports 100 Mbit signaling and permits rapid connect or disconnect in tight terminal boxes. The plug is rated for 4 A.
At the controller end the assembly presents an RJ45 jack with eight contacts so that standard switch ports can be reached without additional adapters. Head A withstands 160 V, while the RJ45 side is limited to 125 V and 1 A, enabling safe segregation of supply and data potentials. A matte-orange sheath of PUR (polyurethane) protects the cores against oil, welding spatter, and abrasion, yet keeps the static bend radius low for compact cable trays. Factory tests certify the design for 20 million drag-chain cycles; combined with a loop resistance of 250 Ω/km and a length of 3 m, this endurance supports long service intervals in servo axes that run continuous shifts.
