ZK1090-3200-0200 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK1090-3200-0200 is part of the ZK Motor Cables series and features a star quad cable structure with a 20 meter length. This cable includes a 4-pin straight female M8 socket on one end and an open end on the other, with PUR jacket material and shielding. It supports a rated current of 4 Amps at 40°C and is designed for up to 20 million cycles.
Internal Product Review
The ZK1090-3200-0200 is a Beckhoff motor cable well suited for precise and dependable motion-control connections. The star-quad cable structure and shielding support clean, stable transmission in electrically noisy installations. A PUR jacket and 20 million flex cycles make the cable an excellent choice for repetitive industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK1090-3200-0200 motor cable is manufactured by Beckhoff and belongs to the ZK Motor Cables series. This pre-assembled lead is intended for moving-axis installations where a single harness must carry both power and feedback signals between a drive amplifier and a compact servo motor. By combining matched impedance pairs with a continuous shield and a wear-resistant PUR jacket, the cable streamlines routing inside drag-chain systems found in packaging, assembly, and material-handling cells.
It measures 20.00 m, so a control cabinet can be placed well outside the work zone while still maintaining signal integrity. The conductors are arranged in a Star Quad geometry that balances inductance and capacitance to suppress crosstalk on differential encoder lines. A characteristic impedance of 100 Ω ±15 Ω at 100 MHz aligns with typical RS-485 transceivers, limiting reflection peaks on long runs. The M8 connection is A-coded, preventing accidental interchange with similarly sized sensor plugs. Each core is built from 19 × 0.1 mm copper strands, and the fine stranding lowers flex stress while keeping DC resistance within limits for precise current regulation.
The cable’s overall cross-section is 1 × 4 × 0.14 mm² (AWG26), and a tinned copper braid surrounds the pairs to provide 360-degree shielding against inverter-generated EMI. On the motor side, an M8 Socket with straight female contacts delivers a four-pin interface, whereas the drive side is left open for field-crimped ferrules or terminal blocks. Flex durability reaches 20 million cycles in energy-chain radii down to 100 mm, supporting high-speed gantry axes. Electrical loading is rated at 4 A at 40 °C, with a voltage limit of 50 V AC or 60 V DC to match low-voltage servo auxiliaries. The PUR jacket resists oil, coolants, and weld spatter, and the built-in shield establishes a low-impedance ground path for EMC compliance.
