ZK1090-3191-0150 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff ZK1090-3191-0150 is part of the ZK Motor Cables series and features a 15 meter cable with a 1 x 4 x 0.14 mm² (AWG26) cross-section and PUR jacket. This cable has an M8 4-pin plug on one end and an RJ45 8-pin plug on the other, rated for 30 V and supporting a maximum acceleration of 10 m/s² and a top speed of 15 m/s. It offers 90 percent shield coverage and a maximum of 20 million cycles.
Internal Product Review
The ZK1090-3191-0150 is a Beckhoff motor cable with a 4-pin M8 plug and an 8-pin RJ45 plug. PUR jacket material and 90% shield coverage support clean signal transmission and dependable performance in motion-oriented installations. A 20 million cycle rating stands out as a strong durability advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ZK1090-3191-0150 cable assembly is manufactured by Beckhoff and is intended for moving-axis installations that require reliable signal transmission during continuous motion. It is suitable for use in automated cells, gantries, and packaging lines where flexible routing is necessary and repeated cable movement is expected. A polyurethane outer jacket and finely stranded conductors support repeated bending in energy-chain environments while helping the cable maintain stable electrical performance over long operating periods. This construction is useful in applications where compact routing and dependable communication are more important than the rigidity of fixed-installation wiring.
The conductor set uses 1 × 4 × 0.14 mm² (AWG26), and the assembly has a full length of 15.00 m. The insulation system is rated for 30 V, which suits low-voltage signal transmission in compact industrial wiring. Direct current resistance is limited to 250 Ω/km, while signal running time is 5.55 ns/m and capacitance is 51 pF/m at 1 kHz. These electrical values help support stable communication where cable motion and nearby electrical activity can affect signal quality. For dynamic use, the cable is built for drag-chain travel at up to 15 m/s, acceleration up to 10 m/s², and service life up to 20 million cycles.
On one end, the cable uses an M8 plug with an A-Coded layout and a 4-Pin contact pattern. The opposite end uses an 8-Pin RJ45 plug, allowing direct connection to compatible I/O panels or switch ports without added adapters. Shielding covers 90 % of the circumference through a braided and foil composite design, which helps limit electromagnetic interference from surrounding equipment. That shielding arrangement is useful when the cable runs beside motor leads, control wiring, or other sources of electrical noise inside a machine frame. The PUR jacket also supports flexible routing in continuous-motion applications, reducing wear when the cable is installed in drag chains or other guided cable paths.
