KL9300
Wake Industrial LLC is not an authorized distributor of this product.
MPN: KL9300-0000
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The KL9300 is an analog input module manufactured by Beckhoff. A part of the KL Analog Input Modules series, it features four diodes and a nominal cut-off voltage of 1000 V. The module has a peak current of 2.5 A for 100 ms. It conforms to EN 60068-2-6 standards for vibration resistance and weighs approximately 50 grams.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KL9300 terminal module from Beckhoff belongs to the KL series.
This terminal module includes four built-in diodes to create potential-free interconnections, which both protect different circuits from electrical isolation and facilitate effective signal paths. The device works perfectly in systems that need protected circuits or where controlled directional current flows must exist. The diodes come with 1000 V nominal cut-off voltage parameters, which enable effective insulation and immunity against overload events. Each output diode of the module supports 1 A continuous current but allows peak pulses of up to 2.5 A for brief durations of 100 milliseconds, which enables it to tackle short power surges or switching transients. Each diode operates with a normal voltage drop of 0.7 V, which ensures low energy loss and maintains its operational effectiveness. The K-bus employs less-than-200-V individual-channel isolation together with 1500 V of electrical isolation between the entire control system and the field side, which enhances system safety and stability. Environments with industrial conditions are accommodated by KL9300, which fulfills specifications according to EN 60068-2-6 and EN 60068-2-27 for vibration and shock resistance.
The device fulfills EN 61000-6-2 standards regarding immunity requirements. It also operates stably in electrically complex setups and precisely follows EN 61000-6-4 emissions standards to do so in electromagnetic noisy conditions. The unit exists as a light 50-gram device that maintains its functions within a temperature band between 0 and 55°C. The device maintains safe storage conditions at temperatures from -25 to +85°C. The IP20-rated design of this module allows equipment installation from any position, so users can put it in different cabinet arrangements. The KL9300 demonstrates sufficient tolerance to relative humidity of 95% (non-condensing), which makes it an ideal solution for industrial applications.
Frequently Asked Questions about KL9300:
Q: What is the purpose of the KL9300 diode terminal module?
A: The KL9300 is used to control directional current flow and isolate circuits using four built-in diodes, ensuring safe and reliable performance in industrial systems.
Q: What are the voltage and isolation ratings of the KL9300?
A: The diodes have a 1000 V nominal cut-off voltage, with 1500 V isolation between the control system and field side, enhancing overall electrical safety.
Q: Which environmental standards does the KL9300 comply with?
A: It meets EN 60068-2-6 and EN 60068-2-27 for vibration and shock resistance, as well as EN 61000-6-2 and EN 61000-6-4 for EMC compliance.
Q: What is the KL9300's operating and storage temperature range?
A: The KL9300 operates between 0 and 55°C and can be stored between -25 and +85°C, with 95% non-condensing humidity tolerance for industrial environments.
Q: What is the peak pulse current capacity of each diode?
A: Each diode supports a continuous current of 1 A and can handle peak pulses of up to 2.5 A for 100 milliseconds, offering surge protection during switching events.
