KL3202-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff KL3202-0000 is part of the KL Analog Input Modules series and supports two analog RTD sensor inputs, including Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, and Ni1000 types. This compact terminal uses 2- or 3-wire connection technology by default and features a resolution of 0.1 °C per digit. It is housed in a polycarbonate casing with IP20 protection class and is designed for mounting on a 35 mm DIN rail.
Internal Product Review
The KL3202-0000 is a Beckhoff analog input module with 2 inputs for accurate temperature signal handling. Support for 2-/3-wire connection technology and compatibility with Pt100 through Ni1000 RTDs make the module highly flexible in process measurement circuits. IP20 protection suits control-cabinet service, and 0.1 °C/digit resolution is a strong highlight for dependable thermal monitoring.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KL3202-0000 is an analog input terminal manufactured by Beckhoff within the KL Analog Input Modules series. It is designed for temperature measurement in distributed I/O stations, where it converts resistance values from RTD sensors into engineering units that a controller can process directly. By placing the signal-conditioning electronics on the DIN rail near the sensors, the module helps reduce field wiring length and supports compact temperature acquisition in heating, cooling, and general process-control applications. This layout also keeps the installation organized when several temperature points must be monitored in a small cabinet.
Electrical hookup versatility is provided through 2-wire or 3-wire connection technology, and the default 3-wire arrangement helps reduce measurement error caused by lead resistance. The terminal housing measures 12 x 100 x 68 mm, so the module uses very little panel width in a dense I/O assembly. Its enclosure has an IP20 rating, which limits use to protected control-cabinet environments while allowing close side-by-side installation. Internally, a resolution of 0.1 °C/digit supports fine temperature measurement for control tasks that require stable input values. The input stage accepts Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000 RTDs, giving the terminal broad compatibility with common platinum and nickel sensor types. An integrated monitoring circuit also checks each channel for open-circuit conditions and reports a disconnected sensor to the control system.
Power for the measurement electronics is supplied via the K-bus, so no separate wiring is needed for the terminal itself. The housing snaps onto a 35 mm DIN rail, and the side keying helps maintain proper alignment with adjacent terminals during installation. Process data is transmitted as 2 x 16-bit input words, and an additional pair of 8-bit values can carry status or control information when required by the application. The terminal provides two input channels in a housing made of Polycarbonate, which helps keep the body lightweight while maintaining good dimensional stability. With signal transfer handled through the backplane, the module exchanges data with neighboring terminals without extra jumpers or separate interconnect hardware.
