KL3022
Wake Industrial LLC is not an authorized distributor of this product.
MPN: KL3022-0000
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The KL3022 analog input module offers 2 inputs, a resolution of 12 bits, a current input signal range of 4 to 20 mA, and operates with a conversion time of approximately 2 milliseconds. Part of the KL Analog Input Modules series by Beckhoff, it features a common-mode voltage of up to 35V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KL3022 analog input terminal designed by Beckhoff as a bus terminal transmits electrically isolated digitized current. This terminals input channels are equipped with differential inputs. The product detects overload and open lead conditions. This devices status is relayed through the K-bus to the controller. The units data exchange with its supporting bus coupler is portrayed by the run LED. It reports a broken wire or an overload condition using the error LED. This terminal is noted for dual-channel functionality.
The product has separate run and error LEDs for each input channel. This devices signal current is set between 4 mA and 20 mA. The units measuring error is less than +/-0.30% in the normal operating temperature range. Its run LED is in an off state if the bus coupler transmits no process data for 100 ms. This terminals process data is highlighted in twos complement form. The products ESD protection and also its protection class can be ensured only by the termination of its assembly. This devices locking mechanism and the fixing bolts of the mounting rail must not conflict with each other. The unit-associated PE contact is first mated for safety reasons. Its mounting rail features capacitive coupling of the protective earth contact for electromagnetic compatibility.
This analog input terminals KS2000 configuration software has an easy-to-use interface. The products differential inputs share a ground potential internally. This device is apt for ground-free measurements in current loops. The unit remains unaffected by the cross-currents because of voltage differences. It stores the raw values of its process data in is R0 register present in the RAM.
Frequently Asked Questions about KL3022:
Q: What happens when the KL3022 terminal comes in contact with highly insulating materials?
A: Electrostatic discharge occurs when the KL3022 terminal comes in contact with highly insulating materials.
Q: What kind of connections must be used if the mounting rails of the KL3022 terminal have a height of 7.5 mm?
A: Flat mounting connections such as rivets or countersunk screws must be used if the mounting rails of the KL3022 terminal have a height of 7.5 mm.
Q: What precautions should be taken during the installation of the mounting rail of the KL3022 terminal?
A: The mounting rail should not be deformed, bent, crushed, or twisted during the installation of the mounting rail of the KL3022 terminal.
Q: What is the total extension of the terminal segment of the KL3022 terminal without a coupler?
A: The total extension of the terminal segment of the KL3022 terminal without a coupler is 64 terminals.
Q: What is the protection rating of the control cabinet of the KL3022 terminal?
A: The protection rating of the control cabinet of the KL3022 terminal is IP 54 or higher.
