KL2809-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff KL2809-0000 is an analog input module from the KL Analog Input Modules series that features 16 outputs and supports a maximum output current of 0.5 A per channel. It operates at a nominal voltage of 24 V DC, offers reverse polarity and short-circuit protection, and mounts on a 35 mm DIN rail.
Internal Product Review
The KL2809-0000 is a Beckhoff I/O output module built for efficient 24 V DC switching across 16 outputs. Short-circuit proof circuitry and reverse polarity protection support reliable panel operation, making the module a strong choice for dense control architectures.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KL2809-0000 is an output terminal manufactured by Beckhoff within the KL Analog Input Modules series. Despite that series assignment, this unit serves as a discrete power distribution module that switches field loads under PLC command instead of processing analog signals. Installed in a modular I/O station, it forwards control signals and supply potential through the backplane so additional output points can be added without complex point-to-point cabinet wiring. Its role in industrial automation is to actuate lamps, relays, solenoids, and other low-power devices directly from the control cabinet in modular control systems. This makes the terminal suitable for straightforward on/off control tasks in conveyors, handling equipment, and packaging machines.
On the front face, the device offers 16 outputs, each presented on spring-cage terminals and reported to the controller as an individual bit for direct switching logic. Every channel can deliver up to 0.5 A per channel at the rated supply of 24 V DC, supporting ohmic, inductive, or lamp loads in typical machine circuits. Installation follows the standard 35 mm DIN rail profile, and several terminals can be mounted side by side while remaining inside an IP20 cabinet environment. Each output can therefore be addressed independently by the PLC during normal sequence control.
The housing is molded from polycarbonate and measures only 12 mm wide by 100 mm high, so each slice adds very little width to the terminal row. Internal signaling relies on 1-Wire connection technology, and the terminal maps straight into the PLC image as 16 output bits for deterministic state changes. Reverse-polarity protection and short-circuit-proof transistors guard the field wiring during operation. The power contact shares a common reference to ground, which simplifies potential distribution across adjacent terminals in a dense I/O assembly. Front access to the connections also helps keep narrow terminal rows usable in shallow enclosures.
