KL2732 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
MPN: KL2732-0000
The Beckhoff KL2732 is a 4-channel Terminal Block in the KL Analog Input Modules series, designed with 2-wire connection technology. It operates at 24 V DC, offers short-circuit protection, and supports up to 1000 switching operations per second. This compact module is 12mm wide and mounts on a DIN rail.
Internal Product Review
Beckhoff KL2732 Bus Terminal provides robust AC load control with surge protection up to 275 V AC and 3750 V AC dielectric strength. Its interlocked outputs prevent short circuits. The terminal operates reliably with a rotating field frequency of 47-63 Hz. It supports AC load control from 12 V AC to 230 V AC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Beckhoff provides the KL2732 Bus Terminal for standard AC load control in industrial automation applications. This Terminal applies two-wire connection technology. It offers two make contact outputs without power contacts. The two outputs are interlocked such that one cannot short-circuit. The terminal does not need any address or settings for configuration.
One of the unique properties of the KL2732 terminal is reversing motors. This function is applicable for use in blinds or shutters. The terminal needs no current consumption from the power contacts. It consumes a typical A of 10 mA off the K bus. The process image has a bit width of two outputs. These outputs can also be controlled separately by the controller. The terminal provides a rotating field frequency of 47-63 Hz. It can handle a peak current of 40 A for 16 msec. It also supports 3A peak current for 30 seconds. The KL2732 terminal has its standard switch-off time defined as T /2. The weight of the terminal is estimated to be 55 grams. The output has a residual voltage of a maximum of 1.5 V. Nominal voltage for operation will be between 12 V AC to 230 V AC.
The KL2732 terminal is suitable for ohmic and inductive load types of control. The maximum current of output per channel is given at 1 A. 0.8 mA is typically the leakage current at the OFF state. The leakage current is not more than 1.5 mA per channel. The terminal has surge voltage protection over 275 V AC. It offers 500 V electrical isolation between the K bus and field voltage. The dielectric strength is rated at 3750 V AC for one minute. This terminal is applicable for switching AC loads in an industrial system.
