KL2722-0010 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff KL2722-0010 module is part of the KL Analog Input Modules series and features two make contacts with a nominal voltage range of 12 to 230 V AC. It offers a peak current of 40A for 16 ms and a max output current of 1A per channel. The device operates between 0…55°C and comes with an IP20 protection rating.
Internal Product Review
The KL2722-0010 Digital Output Bus Terminal delivers reliable AC switching with 40 A peak current support and integrated surge protection above 275 V AC. Its 4-wire locked output ensures precise control. The model offers efficient operation with a residual voltage of 1.5 V and no configuration required.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The model KL2722-0010 is a Digital Output Bus Terminal used for switching AC voltages. It features a semiconductor triac switch for wear free operation. It handles voltages from 12 V AC to 230 V AC and supports mechanical reversing motors.
The KL2722-0010 bus terminal has two mutually locked outputs with 4 wire connection technology. Each channel can handle a maximum output current of 1 A. It operates at a rotating field frequency between 47 Hz and 63 Hz. The terminal supports both ohmic and inductive loads. Peak currents of 40 A for 16 ms and 3 A for 30 s are supported by the terminal. It comes with a surge protection feature that works when voltage exceeds 275 V. Switch on time ranges from 0.1 ms to 10 ms triggered at zero crossing. The residual voltage of the terminal in the OFF state is a maximum of 1.5 V. Electrical isolation is provided at 500 V (K-bus to field voltage) and 3750 V AC for one minute. The typical leakage current of the terminal is 0.8 mA with a maximum of 1.5 mA per channel. The terminal does not require address or configuration settings.
The current consumption of the Beckhoff KL2722-0010 bus terminal from the K-bus is typically 10 mA. The terminal image contains two output bits. It is especially designed for use with mechanical reversing motors such as blinds. However, it is not suitable for controlling LED loads. The terminal weighs approximately 55 grams. The model is designed for efficient performance with high isolation standards. The integrated features ensure reliable switching in AC control systems. The KL series bus terminal uses triac switching elements for minimal wear and long service life.
