KL2535
Wake Industrial LLC is not an authorized distributor of this product.
MPN: KL2535-0000
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships in 3 Days
The Beckhoff KL2535, part of the KL Analog Input Modules series, features two outputs and a nominal voltage of 24 V DC (-15%/+20%). This module offers a resolution of up to 12 bits and a PWM clock frequency of 36 kHz. It is CE approved, weighs approximately 55 grams, and operates within 0A"55AC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Provided by Beckhoff, this KL2535 pulse width current terminal is typically a bus terminal. The terminal features galvanic isolation from the K-bus. This product uses pulse width control to control the output current. The devices housing comprises LEDs for fault diagnosis. This unit features short circuit as well as overload protection for the output stage. It has a current-controlled duty factor of 0% to 100%. The terminal comprises a protective earth grounding connection.
This products manual contains instructions for its safe operation. The device deploys standard wiring. This unit provides support for a marginal width assignment. It has two enable and error LEDs, a power LED, a run LED, and a warning LED. The terminal comes with a very compact design. This products current terminals depict an integrated PWM output stage. The devices load current is not affected by a change in the voltage level. This unit features at least 1 mH load inductance. It has an internal encoder that can register a latch event.
The terminals digital input signals are capable of generating a latch event. This product highlights an overtemperature warning if its internal temperature reaches 80 AC. This device encounters a load de-energization when an undervoltage or a broken wire is detected. The unit deploys dithering to eliminate magnetization effects. Its surroundings must be grounded properly. The pulse width current terminal must be positioned to the right of its fieldbus coupler. This product portrays an extended profile of its mounting rail with its locking mechanism. The device can ground up to 125 A short-circuit currents. This unit must have adequate clearance above and below it at the installation site. Its connection surfaces must face forward during installation.
Frequently Asked Questions about KL2535:
Q: Why should there be adequate spacing between the KL2535 terminal and adjacent components?
A: There should be adequate spacing between the KL2535 terminal and adjacent components for ventilation purpose.
Q: How does the ventilation of the KL2535 terminal take place?
A: The ventilation of the KL2535 terminal takes place from under it.
Q: What happens if the KL2535 terminal is not powered down before its installation?
A: An electric shock may occur if the KL2535 terminal is not powered down before its installation.
Q: What technology does the KL2535 terminal incorporate for its assembly?
A: The KL2535 terminal incorporates screwless spring force technology for its assembly.
Q: How is the configuration of the KL2535 terminal done?
A: The configuration of the KL2535 terminal is done through the bus coupler or controller.
