KL1501 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
MPN: KL1501-0000
The Beckhoff KL1501 is an analog input module from the KL Analog Input Modules series. It features a 1 x up/down counter using EN 61131-2 Type 1 input and has a maximum input frequency of 100 kHz. The module is 12 mm wide, supports 32-bit counter depth, and operates at a rated load voltage of 24 VDC.
Internal Product Review
The KL1501 is a Beckhoff input module designed for 32-bit up/down counting with a maximum input frequency of 100 kHz. EN 61131-2 Type 1 input characteristics and IP20 protection support stable cabinet-level performance in demanding control systems. A strong choice for precise high-speed counting in 24 VDC automation architectures.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KL1501 terminal is manufactured by Beckhoff as part of the KL Analog Input Modules series. It inserts into a standard Bus Terminal stack and serves as a single-channel up/down counter that transfers real-time position or event totals to the controller. The terminal supports applications such as material length tracking and machine cycle counting in automated production lines. Its compact modular format allows the counter channel to be positioned alongside other Bus Terminals that handle separate machine signals.
An aligned width of 12 mm keeps the terminal compact within the Bus Terminal stack. The counter accepts input signals up to 100 kHz, so high-frequency encoders can be monitored without missing edges. Internal arithmetic is handled by a 32-bit register, allowing more than four billion counts before rollover. Field wiring is powered by a rated load voltage of 24 V DC, which is compatible with common control cabinet supplies. The plastic housing carries a protection rating of IP20, so installation within an enclosed panel is required to protect the terminal from contaminants and moisture. Count detection occurs on the rising edge of the input signal. Two additional outputs are available for user-defined signaling, allowing the controller to operate related functions through the same terminal.
The module fastens to a 35 mm mounting rail and may be installed in any orientation without affecting operation. Within the PLC process image, it occupies 40 I/O bits that carry the counter value and status data. The input circuitry follows the EN 61131-2 Type 1 standard, providing consistent current thresholds for logical states. The terminal has load-only power contacts, which carry actuator power but do not supply its internal electronics. Software selects the counting direction, allowing the channel to operate as either an upward or downward counter according to the control program. No manual address setting is required because the terminal’s position in the stack determines its process mapping. This automatic mapping reduces configuration steps during cabinet assembly and prevents errors associated with physical address switches.
