ES2262

Product Description:

ES2262 is an electronic part for control setup. It offers 2 spots to connect output things, using 4-wire style hookup. This piece knows how to handle many kinds of connections, like the simple ones, the ones with coils in them, and even light bulbs, known as ohmic, inductive, and lamp loads working at a normal power level of 24 V DC (-15%/+20%). For building complex systems, using simple wires for needed power through different connection points through the device makes joining things together easy.

This part can talk on the network very fast, even working with exact time because it has Distributed Clocks with a very good number for how close the timing must be, being < 1 µs. It can also look at fast changes by using a method called Oversampling Factor, where you could check signals many times faster than the normal timing rhythm, like picking up speed at a rate from n = integer multiple of the cycle time, 1…1000 for complex actions. The place where power leaves is structured for pushes and pulls, this is called push-pull output stage, making sign goes out good; sending out as much as 0.5 A (short-circuit proof in push operation) per channel.

Using this piece uses a little bit of power itself from the inside line called the e-bus, usually taking typ. 70 mA, and on the main plugs for power it takes just typ. 35 mA + load added to what the connected things need. It can live in places with temperature levels from 0…55°C when running, though it can wait around in colder or much hotter times too while not working, able to sit with temperature from -25…+85°C for storage without problem.