ES1098
Wake Industrial LLC is not an authorized distributor of this product.
MPN: ES1098-0000
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The ES1098 electrostatic precipitator module operates at a rated voltage of 12 kV DC, offers an efficiency of 98.5%, and produces less than 45 dB of noise. Part of the ES EtherCAT Terminals series by Beckhoff, it is constructed from galvanized steel with an epoxy coating and weighs 8.5 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Beckhoff ES1098 is a Digital input terminal that utilizes EtherCAT to acquire binary control data and transmit it to higher-level automation devices in factory automation. Beckhoff, a company known for its automation technology, can quickly pick up signals and work reliably with EtherCAT systems.
The ES1098 digital input terminal has eight digital input channels, and each one has a green LED for checking the signal state. The digital input terminal operates within a nominal voltage range of −15% to +20% and operates at 24 V DC. The terminal operates at a nominal voltage of 24 V DC and has a range of -15% to +20%, so it can handle output voltages of 18 to 30 V DC for logic "0" and 0 to 7 V DC for logic "1."The input filter is set at 10 µs, with a typical input current of 3 mA per channel. This ensures that connected sensors have a minimum delay and quick reaction time. The input filter is configured to operate at 10 µs, and the average input current per channel is 3 mA. The consumption of the product is approximately 90 mA from the E-bus and 25 mA from the power contacts. The temperature range for horizontal placement is 0°C to +55°C. The temperature range for other positions is 0°C to +45°C.
The ES1098 digital input terminal weighs about 55 g and is meant to be mounted on a 35 mm DIN rail. The software is responsible for the setup, and the terminal does not require manual configuration of its address. Using a single wire, the product can be used to directly connect multiple instruments. The device can be used with both capacitive and magnetic sensors. With 500 V of electrical separation between the E-bus and field potential, the terminal makes sure that it will work reliably.
Frequently Asked Questions about ES1098:
Q: How does ES1098 indicate each input signal state?
A: Each input channel on the ES1098 has a dedicated green LED that provides clear visual feedback of the current signal state.
Q: Why does ES1098 have a 10 µs input filter?
A: The 10 µs input filter allows the ES1098 to achieve low delay and fast response, which is essential for high-speed signal acquisition.
Q: Does ES1098 require manual address setting for configuration?
A: No, the ES1098 does not require manual address setting; configuration is handled via TwinCAT System Manager software.
Q: How does ES1098 achieve electrical isolation?
A: The ES1098 provides 500 V electrical isolation between the E-bus and field potential, protecting control systems from electrical interference.
Q: Why is ground switching important in ES1098?
A: Ground switching allows direct connection of multi-channel sensors using a 1-wire technique, simplifying wiring and installation.
