EP2328-0002 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff EP2328-0002 is a digital input and output module from the EP Digital Input Modules series. It features four input and four output channels, each output supporting up to 2 A at 24 V DC, and meets the EN 61131-2, Type 3 standard with an isolation voltage of 500 V. The module has protection ratings of IP65, IP66, and IP67 and supports EtherCAT protocol with M8 and M12 socket interfaces.
Internal Product Review
The EP2328-0002 is a Beckhoff digital input module that combines EtherCAT communication with 4 input channels for efficient distributed control. IP65/IP66/IP67 protection and 2 A output current per channel make the module a strong choice for demanding industrial I/O.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EP2328-0002 is a field-installable digital I/O module produced by Beckhoff as a member of the EP Digital Input Modules series. Mounted directly on machinery, it collects sensor states and controls actuators through a single EtherCAT connection, reducing cabinet wiring and update delays in automated assembly lines and material-handling systems. By combining sealed construction with integrated power distribution, the unit interfaces discrete 24 V devices to the controller and returns output commands with deterministic timing.
Its compact housing measures 30 × 126 × 26.5 mm, so it fits into narrow cable trays and machine frames without additional enclosure space. Communication and supply are routed through two M8 sockets with 4-pin, A-coded, shielded connections, and the unit exchanges process data via the EtherCAT protocol at line speed. Rated for washdown and dusty environments, the module carries an IP65/IP66/IP67 protection class, so it can be mounted directly on moving axes or tooling fixtures. Galvanic separation between logic and field level is secured by a 500 V isolation barrier. Two M12 sockets accommodate the sensor leads, and individual cable runs may reach 30 m without repeaters. The device sources up to 0.5 A for sensor power and permits a combined load of 4 A on its output side.
Each of the four inputs draws only 6 mA and uses a 3.0 ms input filter that meets EN 61131-2 Type 3 criteria. Four high-side outputs are provided, and every channel can switch up to 2 A per channel while the shared rail supplies a stable 24 V DC. The aggregate output current must stay within 4 A to protect board traces, and the internal sensor supply contributes 0.5 A for proximity switches or optical detectors. With a maximum cable length of 30 m, the module maintains signal integrity across distributed installations and allows I/O to be placed where it is needed without additional junction boxes.
