Product Description:

The EP2308-0000 is produced by Beckhoff as part of the EP Digital Input Modules series. It serves as a compact field-mounted block that collects and forwards discrete control signals on a real-time automation network, allowing sensors and actuators to be wired directly on the machine without a separate cabinet junction. By combining input and output channels behind a single connector plane, the module helps reduce long cable runs and keeps machine wiring closer to the connected devices. This layout is useful on automated equipment where distributed I/O must remain accessible without taking space in the main control enclosure.

Communication with the control system is handled through EtherCAT, so deterministic updates occur on the same real-time bus used by other Beckhoff terminals. The module accepts 8 inputs, and each channel uses a 3.0 ms filter to reduce false switching from contact bounce or brief signal disturbances. Logic circuitry is powered from 24 V DC, which matches the standard control voltage used by many industrial devices and sensors. The module has an IP67 protection rating, allowing it to be installed close to tooling, conveyors, or moving assemblies where dust and temporary water exposure may be present.

The output side provides 8 outputs, and each channel has a maximum output current of 0.5 A maximum output current for small loads such as indicator lamps or compact actuators. A separate auxiliary rail provides a 0.5 A sensor supply for connected proximity switches, which helps keep sensor power separated from the switched output load. The housing measures 30 × 126 × 26.5 mm, making it easier to place the unit along machine frames, guarding, or transfer sections where available space is limited. All signal leads terminate through keyed sockets, supporting quick-connect cordsets and helping preserve the enclosure protection without extra sealing hardware.