EK9300-1007 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The EK9300-1007 is an EtherCAT coupler produced by Beckhoff as part of the EK EtherCAT Couplers series. It supports a PROFINET protocol and features two RJ45 bus interfaces with a maximum cable length of 100 meters. This unit operates with a supply voltage of 24 VDC and has an IP20 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EK9300-1007 is an EtherCAT-to-fieldbus coupler manufactured by Beckhoff and assigned to the EK EtherCAT Couplers series. It sits between a local EtherCAT terminal string and an external controller network, allowing distributed digital and analog I/O to enter higher-level automation architectures without a standalone PLC. By mapping process images into PROFINET telegrams, the unit serves assembly machines, conveyor zones, and drive panels that must exchange deterministic data across different control platforms.
A switched dual-port RJ45 connection accepts line or ring wiring while sustaining a data flow of 100 Mbit/s. The embedded stack uses the PROFINET protocol and supports a continuous copper run of up to 100 m over CAT-5e, four-pair cabling. Galvanic separation protects the control electronics because the field and logic domains withstand up to 500 V of isolation. Internal dissipation is limited to 3 W max., so cabinet thermal planning rarely requires active cooling. The coupler operates from a 24 VDC input that may vary from -15% to +20%, and it draws 2.0 A at nominal voltage to power its electronics and refresh the backplane. An additional 2 A rail is forwarded to attached I/O terminals, while separate 24 VDC power contacts deliver up to 10 A for actuator loads.
The housing measures 64 x 100 x 73 mm and carries a protection rating of IP20 against finger contact and settled dust. Up to 1440 bytes I/O max. can be exchanged per cycle, matching medium-sized modular stations, and the integrated power contacts provide 24 VDC, 10 A max. for relays or valve terminals. CAT 5 twisted-pair wiring, a 30 mm backplane process-image width, screwless push-in terminal blocks, and a USB device port support compact cabinet installation and local parameter access.
Frequently Asked Questions about EK9300-1007:
Q: Which protocol does the EK9300-1007 coupler support for network communication?
A: The EK9300-1007 EtherCAT Coupler operates using the PROFINET protocol for communication with other devices.
Q: What is the largest process data size supported by the EK9300-1007?
A: This coupler features a maximum process data size of 1440 bytes for I/O tasks.
Q: What are the ratings for the power contacts on the EK9300-1007?
A: The EK9300-1007 provides power contacts rated at 24 VDC with a maximum current of 10 A.
Q: How many RJ45 bus interfaces are available on the EK9300-1007?
A: The EK9300-1007 includes two switched RJ45 interfaces for bus connection.
Q: What is the isolation voltage provided by the EK9300-1007 coupler?
A: This model features an isolation voltage of 500 V for circuit separation.
