EK9300 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Beckhoff EK9300 is part of the EK EtherCAT Couplers series and features two RJ45 interfaces for Ethernet connectivity at 100 Mbit/s. This unit is rated for a 24 VDC power supply with a power contact rating of 10 A, and has a maximum power loss of 3 W. The EK9300 supports PROFINET protocol and has a protection rating of IP20.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EK9300 is an EtherCAT bus coupler manufactured by Beckhoff within the EK EtherCAT Couplers series. Its role in industrial automation is to link a block of EtherCAT terminals to a PROFINET controller, translating local I/O data into the fieldbus format expected by higher-level control systems. By consolidating wiring at a single node, the device simplifies cabinet layouts and shortens setup time.
The coupler has a switched 2 x RJ45 (Switched) bus interface, and the ports support 2 x Ethernet 100 Mbit/s communication so additional stations can be daisy-chained without an external switch. Communication with the controller follows the PROFINET protocol, and up to 1440 bytes of cyclic process data can be exchanged in each cycle. Internal electronics draw from a dedicated 24 VDC logic supply, and the control cabinet must furnish 2.0 A at this voltage to satisfy the required supply output. Separate power contacts transfer 24 VDC at 10 A to downstream terminals, and the integrated I/O segment current is limited to 2 A so field devices are protected from overcurrent events. Because the coupler dissipates only a small amount of heat, it can be used in densely packed assemblies. Its compact width also helps it fit beside higher-power drives in crowded cabinets.
Housed in a 64 mm-wide, 73 mm-long enclosure that stands 100 mm tall, the EK9300 occupies little cabinet space. The electronics dissipate only 3 W at maximum load, which eases thermal management. A front-panel 1 x USB Device port allows service access and parameter backup. The housing carries an IP20 protection rating, making the unit touch-safe while requiring installation in a clean, dry environment. Threaded strain-relief points molded into the housing support fieldbus and USB cables, helping prevent vibration-induced disconnects on mobile machinery.
Frequently Asked Questions about EK9300:
Q: Which communication protocol is supported by the EK9300 coupler?
A: The EK9300 supports PROFINET as its protocol for communication.
Q: What type of bus interfaces are provided on the EK9300?
A: The EK9300 features two switched RJ45 bus interfaces for networking.
Q: What are the power supply requirements for the EK9300?
A: This coupler is powered with a 24 VDC supply and requires a 2.0 A output.
Q: What is the maximum process data capacity of the EK9300?
A: The EK9300 can handle a maximum process data size of 1440 bytes per cycle.
Q: What is the protection rating of the EK9300 coupler?
A: An IP20 protection rating is specified for the EK9300, indicating its level of enclosure protection.
