CP9030-5 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The CP9030-5 is a Panel PC system manufactured by Beckhoff and is part of the CP Panel PC Systems series. It is powered via the ISA Bus and provides multiple connector options, including 50 display connector pins, 34 FDD connector pins, and a 4-pin power connector with 12V and 5V outputs. The device supports up to 100 meters of maximum segment length and features 2 coaxial cables and 2 CP-Link channels.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP9030-5 panel PC assembly is produced by Beckhoff within the CP Panel PC Systems series. It provides a remote display and I/O termination point so that a central industrial computer can be positioned in a protected enclosure while the operator interface remains on the machine frame. The product carries power, video, and peripheral signals through dedicated flat-cable connectors, supporting distributed control in production, packaging, and material-handling cells.
The signal backbone is formed by 2 coaxial cables for high-bandwidth video and 2 CP-Link channels that multiplex keyboard, mouse, and touch data. A 50-pin display connector mates with the LCD panel, while timing lines 4 DISPON, 7 ENAB, 10 HSYNC, 11 VSYNC, and 13 DISPCLK synchronize pixel output. Storage access is routed through a 34-pin FDD connector. Networked panels can be daisy-chained up to 100 m segment length without repeaters, allowing installation across long production cells. Separate headers supply 10-pin links for the external keyboard, PS/2 mouse, touchpad, touchscreen, and UPS control, and a 26-pin block handles additional external connections.
Power is delivered through the backplane; however, a local supply header with the pinout 1:12V, 2:GND, 3:GND, 4:5V and a 4-pin power header is provided for test or standalone use. The entire assembly normally draws its operating energy from the ISA Bus that seats the interface card. All 10-pin accessory headers share the same keyed shrouds to help prevent miswiring, and the system reserves equal 10-wire ribbons for keyboard, mouse, touchpad, touchscreen, and UPS status. Together with the panel’s 26-pin general-purpose connector, these interfaces allow connection of sensors, buttons, and lamps without additional breakout boards, while the 10-pin touchscreen link supports resistive or capacitive overlays used on compatible operator stations.
Frequently Asked Questions about CP9030-5:
Q: How many CP-Link channels are available on the CP9030-5?
A: The CP9030-5 provides two CP-Link channels for display connection and communication.
Q: What is the maximum segment length supported by the CP9030-5?
A: This unit supports a maximum segment length of 100 meters for cable runs.
Q: What is the pinout of the power connector on the CP9030-5?
A: The power connector on the CP9030-5 uses four pins: 1 for 12V, 2 and 3 for ground, and 4 for 5V.
Q: What is the main power source for the CP9030-5 Panel PC System?
A: The CP9030-5 receives its primary power from the ISA Bus interface.
Q: How many pins are provided for the display connection on the CP9030-5?
A: There are 50 pins dedicated to the display connector on the CP9030-5.
