Product Description:

Beckhoff manufactures the CP7912-1070-0000 as part of its CP Panel PC Systems series. The unit is a fanless front panel computer that provides machine operators with integrated visualization and control. It combines a touch display, a keypad section, and industrial I/O connectors for direct mounting on automation enclosures. This arrangement keeps display and input functions together at the machine.

The front panel carries a 15 in TFT that presents process data at a native resolution of 1024 x 768 pixels, giving operators clear status graphics at close viewing distance. Internally, the electronics draw only 25 W, so heat generation remains low and enclosure cooling requirements stay modest. All circuitry is supplied from a single-source input of 24 VDC, which matches the extra-low-voltage bus used in most control cabinets. A protection class of IP65 seals the front against dust and water jets, while the rear connectors sit on an M6-threaded mounting plate for direct attachment to swing arms or support brackets. Video is routed through a 19-pole M16 DVI connector, power enters through a 4-pole M12 connector, and additional field wiring is available through an 8-pole M9 USB-E socket. Ten dedicated PLC keys allow frequently used functions to be triggered without navigating software menus.

Cables between the panel and the host PC can reach 50 m without signal repeaters, giving more freedom when controllers are installed in remote cabinets. Connector bodies meet IP67, so mating plugs maintain the seal even under washdown conditions and ambient humidity up to 95%. The mechanical outline is 426 mm wide including the aluminum bezel, 395 mm high, and only 28.5 mm deep, which supports flush mounting in thin machine doors. During installation, the M6 mounting threads help maintain alignment, and the low profile helps prevent collision with adjacent equipment.