Product Description:

Beckhoff’s CP7819-1001-0000 panel PC belongs to the CP Panel PC Systems series and is designed as a compact human-machine interface for industrial automation cells and lines. The integrated computer, touch display, and field connectors allow operators to visualize process data, adjust parameters, and relay commands directly to the controller network without a separate monitor or keyboard. The TFT backlight and onboard electronics share a single supply, which simplifies wiring.

The unit uses a TFT display for clear visualization. External graphics can be fed through a DVI-D interface that is routed to the front panel on a 19-pin M16 connector, allowing sealed cable entry without lowering the enclosure rating. Local data exchange is supported by a 5-pin M9 USB connection built to the USB 1.1 protocol; its maximum transfer capacity of 12 Mbit/s is adequate for service peripherals such as memory sticks or barcode readers. System power arrives on a 4-pin M12 plug and must be a regulated 24 VDC (20.4–28.8 VDC) supply, so the panel can be tied directly to common control-cabinet power rails without additional converters.

For deployment on the machine frame, the housing carries an IP65 ingress rating, which keeps dust and low-pressure water jets away from the electronics. Electromagnetic behavior fulfills EN 61000-6-4 for emission and EN 61000-6-2 for immunity, allowing installation beside drives and switching equipment without separate shielding. Mechanical resilience is demonstrated by shock tolerance of 5 G, 30 ms, and vibration endurance of 10–58 Hz at 0.035 mm amplitude or 58–500 Hz at 0.5 G, so the panel remains operational on moving gantries or presses. Component integrity is maintained during transport or storage between -20 °C and +65 °C, ensuring the PC can be stocked as a spare and powered up when required.