Product Description:

The CP7802-1108-0010 is a Panel PC manufactured by Beckhoff within the CP Panel PC Systems series. It houses a touchscreen, processor, and solid-state storage in a sealed chassis, allowing machine visualization, parameter entry, and PLC control to sit directly on production equipment without an external cabinet monitor. The design streamlines installation where space and cable length are restricted, and it gives operators a hardened interface at the point of use for local machine control tasks. Its integrated format reduces the need for separate display and computing hardware at the machine.

The computer draws operating power from a 24 VDC source that matches the standard low-voltage rail in control cabinets. Its aluminum front carries an IP65 ingress protection rating, blocking dust and low-pressure water jets. Reliable service is maintained at ambient temperatures up to 55 °C, and the electronics tolerate relative humidity up to 95 % without condensation. A graphics feed exits through a 19-pin M16 (IP67) DVI socket, while a 5-pole M9 receptacle exposes the USB channel; transfers on this port reach 12 Mbps in accordance with USB 1.1. A sealed four-pole M12 plug delivers input power so that every external lead shares the same round, vibration-safe form factor.

For moving equipment or plant floors subject to impacts, the panel endures 5 G mechanical shock for 30 ms and withstands continuous vibration of 0.035 mm between 10–58 Hz and 0.5 G between 58–500 Hz. Storage is permitted from −20 °C to 65 °C, so temperature swings during transport do not degrade internal components. Video leaves the housing through the DVI-D interface, avoiding analog conversion losses on long cable runs. The 5-pole M9 connector accommodates keyboards, barcode scanners, or service sticks, and the M12 power inlet maintains an IP67 seal when coupled. This layout suits direct mounting on presses, pick-and-place gantries, and robot pedestals without extra protective enclosures.