CP7802-0001-0011 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff CP7802-0001-0011 is part of the CP Panel PC Systems series and has an IP65 protection class with plug protection at the same level. It features a DVI-D video connector, supports USB 1.1 via a 5-pin M9 connector, and operates on a 24 VDC supply voltage. The unit tolerates ambient temperatures up to 55°C and storage temperatures up to 65°C, as well as a maximum humidity of 95%.
Internal Product Review
The CP7802-0001-0011 is a Beckhoff panel PC system built for dependable industrial control, featuring IP65 protection and a 24 VDC supply. DVI-D output through a 19-pin M16 connector supports clean and secure display integration. Compliance with EN 61000-6-2 and EN 61000-6-4 makes this unit a strong choice for stable operation in demanding electrical environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP7802-0001-0011 is an industrial computer terminal manufactured by Beckhoff and distributed within the CP Panel PC Systems series. Intended for machine-level control stations, it combines processing hardware and a display in a sealed housing so operators can supervise processes, adjust parameters, and acknowledge alarms on the factory floor. All external signals—power, USB peripherals, and video—are routed through circular connectors that screw-lock to the case, simplifying installation while preserving the enclosure seal during washdown or high-vibration service. This integrated format reduces the number of separate devices at the workstation and keeps the operator interface close to the machine process. Secure connector retention also helps prevent interruptions caused by cable movement during repeated door opening or equipment vibration.
The housing carries a protection class of IP65, so the enclosure resists dust ingress and low-pressure water jets. Internal circuits are supplied from 24 VDC, eliminating the need for mains voltage inside the enclosure. The unit stays fully operational between 0 °C and 55 °C, and it can be stored from -20 °C to 65 °C without damage. Mechanical reliability is supported by a shock rating of 5 G (30 ms), enabling safe use on moving gantries or presses. For electromagnetic compatibility, immunity conforms to EN 61000-6-2, while emissions meet EN 61000-6-4, reducing the risk of interference with nearby drives and sensors. Humidity tolerance reaches 95% non-condensing, allowing brief exposure to elevated moisture levels.
Field wiring is simplified through circular connectors. Digital video leaves the unit through a 19-Pin M16 plug that carries the DVI-D signal to an external monitor. Keyboard, mouse, or barcode reader input can be attached over the USB 1.1 interface presented on a 5-pin M9 socket. Power is delivered via a sealed 4-Pin M12 connector that locks against vibration and maintains the enclosure seal. Separating the video, peripheral, and power paths across dedicated connectors helps keep routine wiring organized and makes service access more straightforward when the unit is installed in tight spaces.
