Product Description:

The CP7801-0001 is a panel-mount industrial computer produced by Beckhoff and supplied within the CP Panel PC Systems series. Designed as an operator terminal, it combines a fanless embedded controller with an integrated display to run HMI, visualization, or soft-PLC tasks directly at the machine. By integrating processing electronics into a sealed front housing, the unit can eliminate the need for a separate cabinet in many installations and allows arm, wall, or pedestal mounting close to conveyors, filling stations, or packaging equipment.

Field connections are routed through circular industrial connectors that share a protection rating of IP65, so both the control panel and the mating plugs block dust ingress and high-pressure water jets. The front screen uses a TFT panel, delivering stable color and wide viewing angles required for process graphics. Video leaves the computer through a 19-pole M16 interface that carries a pure digital DVI-D signal, minimizing noise over long cable runs. An internal cast-and-milled enclosure made of aluminum provides heat dissipation without fans while keeping overall weight low. Peripheral devices attach to a 5-pole M9 socket that supports USB 1.1 signaling at up to 12 Mbps, and input power arrives on a 4-pole M12 connector located beside the communication ports.

For mechanical stress situations, the panel withstands an impact acceleration of 5 G applied for 30 ms, so accidental knocks during service will not disturb the electronics. It tolerates ambient relative humidity up to 95% without condensation, aided by the gasketed front and a dedicated rear grounding point that diverts electrostatic charge. The 24 VDC input delivered through the M12 power connector can be referenced to protective ground through that bolt, permitting shared supply rails with distributed I/O modules and minimizing voltage differentials.