CP7721-1090-0020 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff CP7721-1090-0020 is part of the CP Panel PC Systems series and features a 12-inch display with 800 x 600 resolution in a 4:3 format. The panel PC is equipped with a numerical front keyboard, two Ethernet ports, one serial port, and one flash card reader. Its housing is made of aluminum and it holds an IP65 protection rating.
Internal Product Review
The CP7721-1090-0020 is a Beckhoff CP Panel PC system with 800 x 600 display resolution and a 4:3 display format. An aluminum housing and IP65 protection give the panel a durable interface suited for demanding production areas. Two Ethernet ports and a numerical front keyboard make the unit a practical choice for machine-level visualization and operator input.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP7721-1090-0020 is an industrial panel PC manufactured by Beckhoff as part of the CP Panel PC Systems series. It combines a control computer, operator display, and keypad in one unit so it can serve as the primary human-machine interface on production lines, packaging equipment, or process skids. By integrating all components in a single enclosure, the device simplifies wiring, reduces cabinet depth, and provides a dedicated interface for PLC diagnostics and recipe handling in demanding automation environments. It is well suited to stations where operators need direct access to machine status, alarms, and data entry without a separate industrial computer.
Overall housing depth is only 31.5 mm, minimizing intrusion into the electrical cabinet. The screen uses a 4:3 aspect ratio with a diagonal of 12 in, and native graphics are rendered at 800 × 600 pixels for standard SCADA layouts. The front plate has a height of 406 mm, while the width measures 308.3 mm, keeping all controls inside this outline. A numerical membrane keyboard is located below the display for setpoint entry, a single flash card reader supports removable data logging, and one RS-232 serial port is provided for legacy sensors. The rear casting spans 280.7 mm in width, allowing installation between control-cabinet support rails.
Network traffic is handled by 2 Ethernet ports, enabling separate machine and plant networks or redundant topologies. The enclosure is milled from aluminum and sealed on the front to IP65, preventing dust or coolant spray from reaching internal electronics. A rear housing height of 374.8 mm aligns with common VESA swing arms, so the slim panel can be mounted on pedestals next to moving equipment without additional shielding. The narrow rear section also leaves more clearance for cable routing and support hardware behind the mounting surface.
