CP7232-0001-0030 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
29 Seconds
The Beckhoff CP7232-0001-0030 belongs to the CP Panel PC Systems series and features a 24 VDC nominal supply with an IP65 protection rating. It has a 3.5-inch motherboard format, a DDR4 RAM type, and supports a touch screen interface. This unit provides one RJ45 Push-Pull LAN port with a maximum cable length of 100 meters and uses a 2.5-inch HDD or SSD for storage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP7232-0001-0030 is a panel-mount industrial computer from Beckhoff that belongs to the CP Panel PC Systems series. As an integrated PC and display, it serves as both the local human-machine interface and the control host for machines that run TwinCAT or other automation software. Its projected-capacitive touch screen lets operators issue commands directly on the front panel, while the backside carries field connectors that route power, Ethernet, and I/O into a sealed enclosure suitable for shop-floor deployment.
The unit operates from a nominal supply of 24 VDC, so it can be wired to the same low-voltage bus that feeds sensors and actuators inside a control cabinet. Inside, a 3.5-inch motherboard accepts high-bandwidth DDR4 RAM, and a single 2.5-inch HDD or SSD occupies the lone storage slot, keeping the design compact. One RJ45 push-pull port provides Gigabit networking, and the integrated secure element fTPM 2.0 stores cryptographic keys for protected boot sequences. The aluminum chassis carries a front-side protection rating of IP65, blocking dust ingress and water jets during washdown cycles. For plant environments with continual machine motion, the computer withstands high-frequency vibration up to 0.5 G, maintaining data integrity during rapid acceleration profiles.
Low-frequency vibration is limited to an amplitude of 0.035 mm, and the electronics continue to function in ambient humidity levels up to 95% RH without condensation. A shock rating of 5 G protects the storage drive and board assemblies during transport or accidental impacts. Network drops can span up to 100 m over copper before a switch is required, matching typical factory-floor topologies. Connectivity is completed by a 12-pin round power connector that locks against vibration, while the touch interface permits glove-friendly operation and eliminates the need for external keypads.
