CP7213-0001-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff CP7213-0001-0000 belongs to the CP Panel PC Systems series and features an IP65 protection rating. It is equipped with a 3.5-inch mainboard and supports a 24 VDC nominal supply with a supply voltage range of 22-30 VDC. The unit includes a 2.5-inch storage slot for HDD or SSD and operates in temperatures from 0 to 45 degrees Celsius.
Internal Product Review
The CP7213-0001-0000 is a Beckhoff panel PC that stands out for dependable machine-level computing, pairing a 24 VDC nominal supply with IP65 protection. Stable operation across a 0 to +45 °C range and resistance to 5 G shock make this unit a strong choice for demanding industrial HMIs.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP7213-0001-0000 belongs to the Beckhoff CP Panel PC Systems series and functions as an operator-level computer for machine control and data acquisition. Housed in a sealed front enclosure, it combines computing hardware, touch display, and I/O interfaces so that PLC tasks, HMI graphics, and network communication run from a single platform in industrial automation lines. This arrangement lets the panel serve as both the local operating interface and the central computing point for the machine section where it is installed.
This unit is powered from a nominal bus of 24 VDC, while its internal converters tolerate a wider input of 22–30 VDC to ride through supply variation. Line conductors up to 1.5 mm² can be used, and the protective ground must be at least 4 mm² to satisfy bonding rules. The aluminum housing carries an IP65 rating, so dust and low-pressure water jets cannot enter the front side when it is panel mounted. All electronics are specified to operate between 0 to +45 °C, and a 3.5-inch mainboard with a rear heat-spread design helps keep component temperatures within that limit. System fastening bolts should not exceed 3 Nm, and during transport the panel withstands shocks up to 5 G for 30 ms. In service, it endures vibration profiles of 10–58 Hz at 0.035 mm amplitude and up to 0.5 G from 58–500 Hz.
Data retention and cold-start recovery are supported by a single 2.5-inch slot that accepts HDD or SSD media. Safe storage is maintained between -20 to +65 °C, allowing the unit to remain protected when it is not operating. An RJ-45 port supports Ethernet segments up to 100 m, which allows controller placement farther from field devices while following the series' shielded-cable guidelines. Final installation is secured with a tightening load of 3 Nm, which helps protect the rear mounting plate from excessive force during panel assembly.