cp7202-1010-0010

Product Description:

Beckhoff manufactures the CP7202-1010-0010. The CP7202-1010-0010 Panel PC operates dependably between 22 to 30 volts DC, 24 volts being the best. Because of this tight specification, the power supply must provide clean, noise-free current to prevent electrical instability that can compromise the system. Outside of this window, even small variations can cause data corruption, fault situations, or stress the internal voltage regulators of the device beyond its safe operating limits. The fundamental electrical engineering principles that govern the stability and durability of the microelectronic components (processor circuits, memory modules, integrated control interfaces) are shown by this level of input voltage tolerance. The CP7202-1010-0010 Panel PC is designed for harsh industrial environments and has an IP65 front panel, which is totally sealed against dust and powerful water jets. The first number, '6', means total dust tightness, which means no particles can get inside and disturb sensitive internal components like touch-sensitive layers or display backlights.

For applications where cleaning with pressured water or unintentional liquid exposure is common, the second number '5' means resistance against water jets from any angle. This level of ingress protection stops corrosion, electrical short circuits and mechanical wear out due to particle buildup. Simultaneously, the device can withstand vibrations between 10 to 500 Hz, displacements up to 0.035 mm at lower frequencies and up to 0.5 G at higher frequencies. It can also withstand shocks up to 5 G for 30 milliseconds. This is important for applications near big equipment or mobile platforms as it ensures the internal solder points and mechanical connections can withstand cyclic mechanical stress without fatigue failure. While storage is from -20°C to +65°C, the operational range of the CP7202-1010-0010 is 0°C to +45°C, so it can work reliably under typical industrial temperature conditions.

To minimize moisture-induced dielectric breakdown or conductive paths across circuit traces, humidity is limited to 95% relative humidity without condensation. An active fTPM 2.0 module secures the internal system by protecting cryptographic assets and ensuring reliable boot processes, which is essential for safe automation systems. EN 61000-6-2 for immunity and EN 61000-6-4 for emissions are verified to avoid operational problems caused by transient electromagnetic fields or interference with co-located equipment. The panel PC with Intel CPU and DDR4 RAM provides high-speed calculation and memory throughput for industrial applications that require real-time processing. Storage options are flexible with high-capacity HDD or robust SSD for fast data access, and a 3V CR2032 lithium battery keeps system time and BIOS settings during a power outage, so no manual reconfiguration is required for operation.