Product Description:

The CP7201-1000-0000 is a panel PC manufactured by Beckhoff within the CP Panel PC Systems series. It combines an industrial display and an embedded computing unit in a single housing so that machine operators can monitor processes and enter commands directly at the line. Typical tasks include recipe selection, alarm acknowledgment, and visualization of PLC data, making the unit a compact human-machine interface that mounts on a 48 mm fixing tube for ergonomic positioning next to conveyors, filling machines, or assembly cells.

The front face integrates a 12 in TFT screen that offers a native resolution of 800 × 600 pixels in a classic 4:3 aspect ratio, giving adequate pixel density for SCADA graphics without straining older software designed for standard-definition formats. A single-finger touch layer replaces mechanical front keys, enabling sealed construction that achieves a front-side rating of IP65; water jets or airborne dust cannot penetrate the bezel, so the unit suits washdown or particulate environments. Internal electronics are supplied from a control cabinet through a 24 V rail that may fluctuate, and the device accepts input between 22-30 V DC, allowing tolerance for cable drops or battery-backed power sources often found in distributed installations.

The panel operates continuously in ambient air from 0 to +45 °C, matching the temperature envelope of most factory floors, while long-term storage or transportation is permissible between -20 to +65 °C without damaging the display stack or logic board. During operation or seismic events, the housing withstands shocks up to 5 G for 30 ms, and it tolerates sustained vibration profiles from 58 to 500 Hz at 0.5 G; these mechanical limits protect solder joints and connectors when the unit is mounted on moving gantries or near stamping presses. Overall dimensions of 353.8 mm in height and 326.3 mm in width leave sufficient room for cable bends behind the screen while keeping the operator station compact.