CP7130-1020-0015 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
39 Seconds
The Beckhoff CP7130-1020-0015 is a panel PC system in the CP Panel PC Systems series, featuring a 10-inch TFT display and an IP65 protection class. It provides 2 Ethernet 10/100 Base-T ports, a control panel interface with DVI-I and USB, and a rolec mounting system. The unit has an aluminum housing, measures 403.4 by 368.2 by 29.5 mm overall, and operates on a 24 VDC nominal supply.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP7130-1020-0015 is an industrial panel PC manufactured by Beckhoff within the CP Panel PC Systems series. It combines an operator interface and a PC-based controller in one enclosure, so machine status, parameter entry, and real-time logic can run at the production line. By locating computation and visualization close to sensors and actuators, the unit shortens signal paths and reduces control cabinet complexity in automated machinery. This layout is useful where local HMI access and controller hardware need to occupy the same station without a separate cabinet-mounted computer.
The panel operates from a nominal supply of 24 VDC, allowing it to share the same low-voltage rail used by I/O modules. For networking, it carries 2 Ethernet ports that follow the 10/100 Base-T standard, enabling direct connection to office or field switches. Two USB sockets comply with USB 2.0, and a bezel connector marked DVI-I + USB permits a remote monitor with touch capability. A single RS-232 port supports legacy serial devices, and the alphanumeric keyboard enables text entry. One free expansion slot accepts an additional fieldbus or storage card. All interfaces are routed through the Rolec mounting arm so cables remain protected inside the support tube.
The chassis measures 236 x 291 x 186 mm and is milled from aluminum for rigidity and heat spreading. With the display bezel included, the housing footprint is 403.4 x 368.2 x 29.5 mm. The front carries a 10 in color screen that uses a TFT panel for wide viewing angles. An enclosure rating of IP65 prevents dust ingress and guards against low-pressure water jets, allowing the PC to be arm-mounted directly beside machining centers or conveyors. The aluminum construction also helps dissipate heat during continuous operation. Its slim front section helps the unit fit swing-arm installations where enclosure depth and operator reach must be controlled.
