CP7103-0001-0030 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff CP7103-0001-0030 is part of the CP Panel PC Systems series and features a mounting arm design with an IP65 protection rating. It offers two Ethernet ports, a serial RS232 interface, and two USB 2.0 ports. The device operates at 24 V DC with a maximum power consumption of 150 W and weighs 11.5 kg.
Internal Product Review
The CP7103-0001-0030 is a Beckhoff panel PC designed for industrial operator interface service, with IP65 protection and mounting-arm installation. Dual 10/100BASE-T RJ45 ports and an RS232 interface support clean integration with both Ethernet-based and legacy control architectures. A 24 V DC supply and 150 W maximum power consumption make this panel PC a strong fit for demanding machine environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP7103-0001-0030 is a Beckhoff Panel PC from the CP Panel PC Systems series intended to serve as a local human-machine interface and PC-based controller in automated lines. Its aluminum housing encloses an industrial display and motherboard so operators can visualize processes, issue commands, and collect data at the machine without adding a separate computer cabinet. The unit’s construction supports installation on production floors that demand sealed electronics and integration with existing EtherCAT, fieldbus, or Ethernet-based control architectures.
The computer accepts a supply of 24 V DC, allowing it to connect directly to common control-cabinet power buses. Under peak load it can draw up to 10 A, so the supply and wiring must be sized accordingly. Internal components limit steady consumption to 150 W, which simplifies thermal management in fanless enclosures. The front panel and rear housing meet a protection level of IP65, preventing dust ingress and resisting low-pressure water jets so the PC can be cleaned in place. Two independent network ports, specified as 2 x 10/100BASE-T RJ45, provide separate channels for control traffic and plant IT connectivity without an external switch.
Service and peripheral expansion are handled through 2 x USB 2.0 sockets that supply power and high-speed data to scanners or flash drives, while legacy devices can still interface over the built-in 1 x RS232 serial port. The enclosure weighs 11.5 kg, so the accompanying mounting arm must be rated for that load plus dynamic forces when the panel is tilted or rotated. Overall housing dimensions of 236 × 291 × 186 mm combine with the separate 504 × 455 × 47 mm display frame to minimize the footprint behind the operator station while leaving sufficient interior volume for heat dissipation and cable routing.
