Product Description:

The CP7037-1037-0010 is a panel-mount industrial computer produced by Beckhoff within the CP Panel PC Systems series. Designed as a remote operator station, it pairs a display, touch interface, and communication link with controllers and I/O on the plant floor. By routing video, USB, and power through a single connection, the unit simplifies cabinet layouts while providing a hardened front end that allows machine builders to integrate visualization and diagnostics directly into equipment. The compact layout also supports operator access where installation space is limited.

The front panel carries a 12 in TFT screen, and the aluminum housing is sealed to IP65 on the front face so dust and low-pressure water jets do not enter. Overall depth is just 27.5 mm, enabling flush mounting in tight enclosures, while the chassis spans 426 mm in width and 370.2 mm in height for compatibility with standard machine frames. System data, power, and video are delivered over the CP-Link interface, and two 2 × BNC sockets handle coax routing to the host PC through shielded cable. Connector glands meet an IP54 rating to protect mating surfaces, and threaded M6 studs secure the assembly from the rear.

In service, the panel tolerates mechanical stresses common to mobile or vibrating machinery; it withstands 5 G acceleration for a 30 ms pulse without loss of function. This helps the unit remain stable on equipment that cycles quickly or experiences intermittent shock. Environmental endurance extends to a relative humidity of 95%, allowing installation in damp production zones when condensation is avoided. The transmission path can be stretched up to 100 m, letting the display reside far from the embedded PC while still receiving its 24 VDC feed, video, and USB signals through the same link. No separate mains wiring is required because power is delivered through that connection.