CP7032-1209-0010 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff CP7032-1209-0010 is part of the CP Panel PC Systems and features a 15-inch TFT display housed in an aluminum enclosure. It supports connector protection rated at IP54, front protection rated at IP65, and operates in temperatures from 0 to 55 degrees Celsius. The panel PC has two BNC connectors, can tolerate up to 95% non-condensing humidity, and withstands shock ratings up to 5 G for 30 milliseconds.
Internal Product Review
The CP7032-1209-0010 is a Beckhoff panel PC featuring a TFT display and CP-Link power supply. Front IP65 protection and IP54 connector protection give this unit a well-engineered fit for demanding industrial interfaces. An aluminum housing and 100 m maximum cable length make this model a strong choice for distributed machine installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP7032-1209-0010 belongs to the CP Panel PC Systems series produced by Beckhoff. It serves as a panel-mounted human-machine interface that exchanges video, USB, and 24 V DC supply through the proprietary CP-Link channel, so it can be located away from the main industrial PC without a separate power line. The panel receives its operating voltage exclusively through CP-Link, so no local supply is required. Two BNC sockets on the rear carry the CP-Link A and B signals, simplifying wiring in control cabinets that already route coax for field devices.
The front of the unit is sealed to IP65, guarding the 5-wire resistive touchscreen and the backlit 15 in TFT against dust jets and water splashes. Rear connector faces are limited to IP54, which is sufficient once the housing is secured inside an enclosure. A pair of 2 × BNC connectors accommodates CP-Link A and CP-Link B for signal transmission and power delivery through the same link. With low-loss RG-59 or comparable coax, the total run may stretch to 100 m, allowing placement on large machines without signal boosters. Continuous operation is supported between 0 to 55 °C, matching typical cabinet climates, and the aluminum housing aids heat dissipation while keeping overall weight down.
Mechanical endurance meets a shock load of 5 G, 30 ms and a vibration profile of 10-58 Hz: 0.035 mm; 58-500 Hz: 0.5 G, so the display stays readable on stamping presses or mobile equipment. Storage limits extend from -20 to 65 °C, preventing damage during transport or idle periods in unconditioned warehouses. Up to 95%, non-condensing humidity is accepted, which suits washdown or tropical facilities when moisture is controlled below the dew point. The aluminum chassis supports heat dissipation, and the TFT display provides a readable interface for remote operation on Beckhoff automation platforms.
