CP7002-1160-0010 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff CP7002-1160-0010 is part of the CP Panel PC Systems series and features a 15 inch display with a resolution of 1024 x 768. The panel uses an aluminum enclosure, offers IP65 protection, and supports a maximum ambient temperature of 55 °C. It is supplied via CP-Link and has 2 BNC connectors, with a maximum panel distance of 100 meters.
Internal Product Review
The CP7002-1160-0010 is a Beckhoff CP Panel PC system with a 15 in display and 1024 x 768 resolution. Aluminum housing and IP65 protection give the assembly a well-engineered feel for demanding industrial service. CP-Link connectivity with a maximum panel distance of 100 m is a strong advantage for distributed machine layouts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP7002-1160-0010 is a flat-panel PC manufactured by Beckhoff in the CP Panel PC Systems series. It functions as a distributed human-machine interface that relays graphics, touch data, and power from a host computer in the control cabinet. Installed on enclosures or operator consoles, the unit provides visualization and command input in automated packaging, assembly, or process lines while removing heat-generating electronics from the production floor.
The housing is intended for machine-mounted display applications that need a rugged remote interface. Four 4 x M6 x 18 mm mounting inserts anchor the aluminum housing to the machine frame, and the front bezel is sealed against dust and low-pressure water spray while the rear connector block is rated IP54. Communication and 24 V supply enter through 2 x BNC sockets that implement the panel link, so no additional power wiring is required. The 15-inch TFT panel presents process graphics at 1024 x 768 pixels, giving enough density for standard SCADA layouts on a compact 15 in screen. Panel width is 426 mm and height is 395 mm, allowing retrofit into common cabinet cutouts. During transport or accidental knocks, the unit withstands shocks up to 5 G, and the cable run can span long machine sections without signal repeaters.
Environmental limits match typical factory conditions. Safe operation starts at 0 °C and extends to 55 °C with no derating, while relative humidity may rise to 95% non-condensing. The permitted panel distance of 100 m lets the display be placed on moving gantries or long production lines while sensitive electronics remain in a stable enclosure. Overall protection on the display face is rated IP65, and the aluminum chassis helps spread heat when ambient temperature approaches the upper limit. Data transmission and power supply are carried through a single hybrid cable between the panel and the control cabinet.
