Product Description:

The CP7002-0011-0010 is a Beckhoff panel PC that belongs to the CP Panel PC Systems series and serves as the operator interface in distributed control or SCADA stations. By combining an industrial display, a passive front panel, and remote video transmission, the unit presents process data and accepts operator inputs directly on the machine or enclosure door. This integration eliminates the need for a separate monitor-plus-computer arrangement and simplifies human-machine interface wiring in automated production cells.

The visualization surface measures 15 in, uses a TFT display, and supports a resolution of 1024 × 768, providing adequate pixel density for graphical process synoptics. A resistive touch screen replaces mechanical keys, so the front is built without keys, while an optional keyboard can still be connected through the front connector. Video and USB signals are transmitted over the proprietary CP-Link interface; with fiber converters, the maximum cable reach extends to 100 m, allowing the PC chassis to be mounted in a protected cabinet up to 328 feet away. The aluminum front panel carries a protection rating of IP65, so airborne dust and water spray do not affect the viewing surface or touch foil.

The rear termination area is sealed to IP54, which guards the twin BNC sockets, power infeed, and service ports against splashing liquids. Installation depth is limited to 28.5 mm, and the bezel width and height are 426 mm and 395 mm, respectively, so the unit fits shallow control doors without interfering with neighboring components. Four M6 × 18 mm mounting holes anchor the housing, and the aluminum construction disperses panel heat and resists vibration. Two BNC outputs mirror the display signal for local diagnostics, and the CP-Link cable can be routed through the gland plate without exceeding the rated 100 m limit.