CP6933-0001-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The CP6933-0001-0000 is a Panel PC from Beckhoff's CP Panel PC Systems series, featuring a TFT display type and single-touch screen. It offers IP65 front protection, supports a supply voltage of 22-30 VDC, and has two USB 2.0 outputs. The PC operates in temperatures from 0°C to +55°C and provides a DVI extension length of up to 50 meters.
Internal Product Review
The CP6933-0001-0000 is a Beckhoff panel PC with a TFT display and a single-touch interface. Front IP65 protection and a 22-30 VDC supply support dependable integration in machine-level installations. The panel PC stands out as a capable HMI platform for consistent industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Beckhoff CP6933-0001-0000 is a Panel PC in the CP Panel PC Systems series that serves as the human-machine interface for PLC-controlled equipment. It uses a TFT display with single-touch input so users can enter commands and monitor process data without a separate monitor. In machine-mounted installations, it provides a local point for visualization, alarm acknowledgment, and process interaction. The unit accepts a 22–30 VDC supply through a rear connector, and its aluminum front panel is sealed to IP65 to block dust and water spray. By combining the display, touch function, and processing hardware in one enclosure, it reduces wiring in distributed automation cells.
The rear housing carries an IP20 rating, which is suitable for protected installation areas inside equipment. Power enters through a 16 A connector. Two service ports, listed as 2 x USB 2.0, support program loading, external peripherals, or data logging. When the screen must be separated from the controller, the DVI interface can drive a remote monitor through up to 50 m of cable, which helps when the machine layout requires a display at a different location. Electronics remain functional from 0 °C to +55 °C, while storage is allowed from −25 °C to +65 °C. Emitted interference meets EN 61000-6-4 for industrial environments.
The unit meets the immunity standard EN 61000-6-2 and is validated for mechanical endurance in industrial service. The enclosure withstands shocks of up to 5 G, 30 ms without data loss and tolerates continuous vibration levels of 10–58 Hz: 0.035 mm; 58–500 Hz: 0.5 G. This helps keep screen and I/O response stable when nearby drives or contactors switch under load. The shock and vibration limits suit installations on moving gantries, presses, or packaging frames where repeated motion and electrical transients are common.
