Product Description:

The CP6912-0001-0000 is a panel PC manufactured by Beckhoff in the CP Panel PC Systems series. It serves as an operator interface and embedded controller, combining a TFT display with a single-touch resistive overlay so that machine data, alarms, and recipe parameters can be entered directly on the production line. The fanless housing is designed for front-panel mounting, allowing computing power and visualization to be placed at the equipment without separate monitor or keyboard stations.

The front panel carries a protection rating of IP65, preventing dust ingress and high-pressure water jets once the bezel is secured. Internally, the electronics run from a 24 VDC nominal supply, allowing the unit to share the same low-voltage rail that feeds sensors and I/O modules. For remote visualization, the integrated DVI-I interface maintains full-resolution video over 50 m of shielded cable, so the computer can be placed inside a control cabinet if required. Mechanical endurance is shown by a shock rating of 5 G, 30 ms, so the panel tolerates rapid stops and tooling impact. The pluggable power entry is rated at 16 A and uses a 5-pin voltage socket that separates ground, supply, and returns. Rear enclosure surfaces meet IP20 for typical cabinet interior use. USB-e extension ports support peripheral connections over the same distance, while the local USB input must remain within 5 m to comply with standard cable limits.

Data throughput on the extender link reaches 480 Mbit/s, matching USB 2.0 performance for flash drives or service tools. Two rear receptacles provide 2 independent USB outputs, which removes the need for an external hub in many layouts. Field wiring can be landed with conductors up to 1.5 mm², balancing current capacity with flexible routing in crowded cabinets. The front seal also withstands ambient moisture, allowing reliable operation at relative humidity levels up to 95% without internal condensation.