CP6901-1009-0010 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
10 Seconds
The Beckhoff CP6901-1009-0010 is part of the CP Panel PC Systems series and features a TFT display and two USB 2.0 outputs. It is designed with IP65 front protection, IP20 rear protection, and has a nominal voltage of 24 VDC with a power plug rating of 16 A. The panel PC has a Ddc rate limit of 50 kHz and supports a maximum humidity of 95 percent.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP6901-1009-0010 is a panel PC produced by Beckhoff as part of the CP Panel PC Systems series. It is installed in control cabinets or on machine frames, where it serves as both a visualization station and a compact controller. The unit links field I/O to higher-level networks while its integrated TFT display presents process data to operators. This arrangement allows one device to handle local machine interaction and control tasks in a compact footprint.
The control hardware executes internal control loops at a maximum rate of 50 kHz, giving the panel sufficient speed for time-critical motion or process tasks. Power is supplied from a 24 VDC nominal source, and continued operation is permitted down to the 22 V minimum plug voltage. The stainless-steel front carries a protection rating of IP65, preventing dust ingress and water-jet penetration on the exposed side. A DVI interface allows remote mounting of an external monitor over cable runs up to 50 m. Mechanical resilience is verified for shocks of 5 G lasting 30 ms, and the electrical connection allows a maximum power wire cross-section of 1.5 mm² with a protective earth conductor no smaller than 4 mm².
The rear housing is classified as IP20, making it suitable for installation inside a closed cabinet where secondary sealing is unnecessary. A keyed circular connector rated at 16 A with five pins supplies power and signal continuity through a single connection point. Two USB ports that follow the USB 2.0 standard support service tools or data logging devices without extra controllers. Environmental endurance extends to a relative humidity of 95% without condensation, allowing placement in damp production areas. The five-pin power socket matches the stated conductor sizes for the supply connection.
