CP6901-1007-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
35 Seconds
The Beckhoff CP6901-1007-0000 is part of the CP Panel PC Systems series and features a TFT display type with single-touch capability. This unit offers front protection rated at IP65, a nominal supply voltage of 24 VDC, and supports USB 2.0 with an extended rate of 480 Mbit/s. It is designed with EMC emission compliance to EN 61000-6-4 and EMC immunity to EN 61000-6-2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP6901-1007-0000 is a panel PC from Beckhoff that belongs to the CP Panel PC Systems series. This unit combines an industrial display, a touch interface, and an integrated controller to provide machine operators with visualization and control functions at the point of use. In automation cells it serves as a human-machine interface, relaying commands to the PLC while showing process data on its front screen.
The computer is powered from a nominal supply of 24 VDC, and its internal circuitry continues to run down to the specified minimum of 22 V, allowing tolerance for line drops. A sealed aluminum bezel gives the front of the device a IP65 rating, so dust and splashed water cannot enter through the display area, while the rear meets IP20 for cabinet mounting. Operators interact through a TFT display with a single-touch surface; this combination suits menu-driven control without multi-finger gestures. Two USB ports follow the USB 2.0 standard, and each port supports data transfer up to 480 Mbit/s. When a local programming tool is required, a passive cable can bridge up to 5 m between the panel and a peripheral USB device without repeaters.
For installations where the IPC chassis is remote, a DVI/USB extender permits a separation of up to 50 m between the panel and the host PC, reducing heat and vibration at the operator station. The five-pin power plug carries a continuous load of 16 A, matching the current drawn by attached field electronics. Operation is specified in environments with relative humidity up to 95% without condensation, helping the panel cope with humid production areas. Electromagnetic immunity conforms to EN 61000-6-2, and emission limits follow EN 61000-6-4; together these ratings support compliance in industrial zones with crowded electrical cabinets. Wiring for the supply may use conductors up to 1.5 mm², simplifying panel assembly with standard flexible cable.
