CP6901-0021-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff CP6901-0021-0000 is part of the CP Panel PC Systems series and features a single-touch TFT display. It offers front protection rated at IP65 and rear protection at IP20, with a supply voltage of 24 VDC. The panel PC supports two USB 2.0 Type A outputs, a DVI link distance of 50 meters, and a maximum wire size of 1.5 mm².
Internal Product Review
The CP6901-0021-0000 is a Beckhoff panel PC system with a TFT display and a single-touch interface. Front IP65 protection and a 24 VDC supply support dependable machine-level integration in industrial installations. A strong choice for HMI applications requiring clean operator access and stable performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP6901-0021-0000 is a panel-mount industrial computer produced by Beckhoff within the CP Panel PC Systems series. The unit combines a TFT display with single-touch input, allowing direct process supervision and command entry at the machine. As a compact human-machine interface, it houses the control hardware, networking, and visualization functions in one enclosure. This arrangement helps reduce separate component count and simplifies wiring inside automated cells.
Electrical integration of the CP6901-0021-0000 is straightforward because the logic stage runs from a 24 VDC supply that can be fed through conductors up to 1.5 mm². Control signals sampled through the device-dependent DDC interface are limited to a maximum rate of 50 kHz, which suits fast machine cycles without creating unnecessary interface load. The front panel is sealed to IP65, so splashing coolant or dust does not affect the screen or the single-touch sensor. Two front-access 2 USB 2.0 Type A ports permit local storage devices or service tools, while the separate Type B service socket supports host connections over distances up to 5 m. High-speed peripheral traffic is routed internally through the RJ45 USB-e link, which moves data at 480 Mbit/s to neighboring modules or an expansion hub.
For remote visualization, the DVI-I output maintains signal integrity up to 50 m, making it suitable for control rooms outside the production area. The aluminum rear housing carries an IP20 rating, so the unit must be installed in a protected cabinet while still benefiting from natural airflow around the enclosure. Operation is permitted in environments with relative humidity up to 95% without condensation, and the power connector is dimensioned for a continuous draw of 16 A to support the embedded electronics and attached accessories. These operating limits are important when planning enclosure protection, cable routing, and power distribution for the panel PC.
