Product Description:

The CP6810-0001-0010 is a panel-mounted industrial PC produced by Beckhoff and belongs to the CP Panel PC Systems series. It serves as a combined visualization and control platform, allowing machine operators to supervise automated equipment through an integrated screen and onboard electronics. The unit uses an aluminum front bezel that resists common shop-floor contaminants, and programmable function keys give direct tactile access to frequently used commands. With a panel height of 336 mm and a width of 370 mm, the device fits medium control enclosures without requiring oversize cabinet doors.

The 10 in diagonal TFT display presents process data at a native resolution of 640 × 480 pixels, a format that matches legacy SCADA applications while keeping graphic loads modest. A rear DVI-D connector allows the panel to mirror its video on a remote monitor without analog conversion losses. The electronics draw a regulated 24 V DC supply, so integration with standard machine-control power buses is straightforward. The front face carries an IP65 rating, indicating that dust ingress and low-pressure water jets will not compromise the keyboard or screen. These characteristics suit packaging lines, conveyors, and compact assembly cells.

For cabinet integration, the panel requires a rectangular cutout measuring 322 mm in height by 356 mm in width, and its electronics project only 32 mm behind the mounting plate, easing retrofits in shallow doors. The rear enclosure is rated IP20, so the section inside the control cabinet must remain in a clean, dry environment. One USB 1.1 Type B service port is available at the bottom edge, supporting device-mode tasks such as parameter backup at up to 12 Mbit/s. Two additional USB 1.1 Type A connectors let users attach keyboards or memory sticks for software updates.