CP6802-1008-0010 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff CP6802-1008-0010 is part of the CP Panel PC Systems series and features a 15-inch TFT display with a resolution of 1024 x 768. It offers IP65 front protection, an aluminum housing, and a touchscreen interface. The unit includes two USB 1.1 ports and uses a DVI-D type output.
Internal Product Review
The Beckhoff CP6802-1008-0010 is a panel PC featuring a 15-inch TFT display. IP65 front protection and a touchscreen interface make the unit especially well suited for industrial HMI service. A 24 V DC supply supports straightforward integration, and the platform stands out as a dependable choice for machine visualization.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP6802-1008-0010 is a Panel PC produced by Beckhoff within the CP Panel PC Systems series. It combines an industrial computer with an operator interface, allowing machine control software and real-time visualization to run on the same front-end hardware. In an automation cell, the unit mounts in a cabinet door or console cutout, giving users direct access to process data through the integrated display and touchscreen.
The front face carries a 15-inch TFT panel that provides a native resolution of 1024 x 768 pixels, giving clear graphics for HMI objects and alarm messages. The TFT technology supplies wide viewing angles and consistent color reproduction, which is helpful when several users stand at different positions around the machine. Visual data from the embedded motherboard can be mirrored to external monitors over a DVI-D port, keeping the digital signal intact along the cable run. A full-width gasket and laminated glass provide IP65 protection on the front, so washdowns or airborne dust do not reach the electronics. Internally, the system is powered from a single 24 V DC source, simplifying wiring because no separate AC feed is required.
The chassis is milled from aluminum, which dissipates heat and keeps overall weight moderate for swing-arm or console installations. The unit fits a 416.4 x 389 mm cutout and is secured by pull-out clamping levers that press the bezel firmly against the panel wall. Two rear USB sockets follow the 2-port USB layout specified for the PC and use the USB 1.1 data rate, allowing connection of flash drives or input devices. Rear ingress is limited to IP20, and a 2-pole WAGO CAGE CLAMP carries the 24 V supply so the back panel remains uncluttered. Overall outside dimensions of 430.4 x 403 x 32 mm keep the footprint compact in crowded control cabinets.
