Product Description:

The CP6802-0000-0000 is a panel-mount industrial computer produced by Beckhoff as part of the CP Panel PC Systems series. Designed for front-of-machine installation, the unit combines processing electronics and a built-in display so operators can execute control logic, visualize process data, and acknowledge alarms at the same location. By consolidating these functions in one housing, the product reduces cabinet space and simplifies wiring inside production cells, packaging machines, and assembly stations.

The front bezel supports a 15 in TFT that provides sufficient screen area for multi-window SCADA layouts, and the overall enclosure depth is only 32 mm, allowing direct mounting in shallow doors. A front sealing system rated at IP65 guards the display and membrane keys against dust and low-pressure water jets, while the internal electronics accept a regulated 24 VDC supply commonly available in control panels. For mechanical stresses during transport or accidental impact, the device withstands shocks up to 5 G. The aluminum faceplate stands 403 mm high and 430.4 mm wide, and installers cut a 389 mm-high opening in the panel so the bezel sits flush. Video from external GPUs can be routed through the integrated DVI-D input when the internal computer is bypassed.

At the rear, protection is limited to IP20 because this section resides inside the enclosure, and a cutout width of 416.4 mm ensures the retaining clamps engage correctly. Two Type-A host connectors give access to keyboards, scanners, or data keys, whereas one Type-B socket permits a connected computer to treat the panel as a downstream device; all three ports operate at a maximum rate of 12 Mbps. The assembly tolerates ambient humidity up to 95% RH without condensation, making it suitable for washdown lines when the front is exposed and the rear is protected by the cabinet.