CP6702-0001-0010 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
23 Seconds
The Beckhoff CP6702-0001-0010 is a Panel PC from the CP Panel PC Systems series featuring a 15-inch TFT display with a resolution of 1024 x 768 and a touch screen input. It has two Ethernet ports, two USB 2.0 Type-A ports, and a serial RS232 interface. The unit operates with a nominal supply voltage of 24 VDC and has a front protection rating of IP65 and a rear rating of IP20.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP6702-0001-0010 is a panel-mounted PC manufactured by Beckhoff for the CP Panel PC Systems series. As a combined human-machine interface and embedded controller, it presents process data to operators. It also executes control tasks directly at the machine, reducing the need for separate terminals or PCs elsewhere on the network and keeping visualization close to the process.
Its operator interface centers on a 15 in TFT display that renders graphics at 1024 × 768 pixels, providing adequate detail for diagnostic screens and trending charts. Because the front glass is a touch screen, the unit is supplied without keys, and all local commands are entered directly on the display. The electronics draw from a single 24 VDC supply, letting it share the same power rail as sensors and I/O modules. For Ethernet-based fieldbus or plant-level traffic, 2 × RJ45, 10/100 Mbit/s ports support redundancy or separate machine and office networks. The housing tolerates ambient air up to 95% non-condensing relative humidity, which helps protect the display stack from moisture damage. The unit also includes 2 × USB 2.0, Type-A sockets for service uploads, external data logging, or temporary connection of input devices.
Environmental segregation is aided by an enclosure rated IP65 at the front and IP20 at the rear, allowing the bezel to face washdown areas while the electronics remain in a ventilated cabinet. Legacy peripherals integrate through a 9-pin D-sub RS-232 interface, and application data resides on a CompactFlash Card that withstands vibration better than spinning disks. BIOS settings are maintained by a 2032 coin-cell battery rated at 3 V and 225 mAh, and incoming power is wired through a 2-pole WAGO 721-602 connector. The chassis measures 430.4 × 403 × 32 mm and matches a panel cutout of 416.4 × 389 mm, allowing the screen to sit flush with machine guards.
