CP6619-0000-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
15 Seconds
The Beckhoff CP6619-0000-0000 is part of the CP Panel PC Systems series and comes with a nominal input voltage of 24 VDC and a power connector rated at 16 Amps. It features IP65 protection on the front and IP20 at the rear, with a single-touch screen and 2 USB outputs. The unit supports a DVI distance of up to 50 meters and offers shock resistance up to 5 G for 30 milliseconds.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP6619-0000-0000 is a Panel PC assembled by Beckhoff for the CP Panel PC Systems series. Designed as a compact industrial computer with an integrated display, it mounts on the machine front and acts as the local visualization and control station for PLC-based equipment. It presents process graphics, accepts operator input through the integrated touchscreen, and forwards commands to the control network without requiring an external PC. This architecture shortens cable runs, reduces the heat load inside the enclosure, and simplifies setup in automated plants.
The unit draws a nominal 24 V DC supply and remains operational down to 22 V, allowing it to tolerate moderate voltage drops on long DC rails. Power is routed through a connector rated at 16 A, and conductors up to 1.5 mm² fit the terminals for typical control wiring. On the display side, a DVI interface supports cable runs up to 50 m, allowing the electronics box to remain inside the cabinet while the screen is mounted on the door. The aluminum front provides IP65 ingress protection once panel-mounted, whereas the rear side is rated IP20 because it resides in a dry, protected enclosure. A single-touch sensor accepts commands through the overlay, and the assembly withstands continuous vibration of 0.5 G at an amplitude of 0.035 mm without signal loss.
Two USB 2.0 sockets provide access for local peripherals. Devices connected directly must remain within a cable length of 5 m, while the integrated USB-e repeater supports longer connections at a sustained throughput of 480 Mbit/s. This extended connection allows barcode scanners and other compatible peripherals to be positioned away from the panel while maintaining data transfer. The housing withstands production-floor shocks of 5 G for 30 ms without affecting the solid-state electronics. Its sealed front helps protect the operator interface from dust and water exposure on packaging lines, material-handling stations, and similar automated equipment.
