Product Description:

The CP6608-0001-0000 is a fanless Panel PC produced by Beckhoff as part of the CP Panel PC Systems series. Configured for front-mount installation, it combines computing hardware, a display, and an operator touch interface in a single housing that serves as the link between field controllers and the machine interface. In typical factory or utility applications, the unit visualizes machine states, accepts recipe changes, and forwards data to supervisory networks. Because the computer and display are integrated, the installation can avoid separate industrial PCs and standalone operator panels.

On the mechanical side, the aluminum front measures 150 x 185 mm and uses a sealing gasket that provides frontal protection to IP65 against dust and low-pressure water jets. With an overall depth of 62.3 mm, the housing fits shallow enclosures, while the mass is limited to 1.2 kg so standard support arms or cabinet doors can carry it without reinforcement. The electronics operate from a single-range 24 VDC supply through a 5-pole screw clamp connector that also accepts control wiring up to 1.5 mm². Two Type-A USB receptacles on the underside permit connection of memory devices or service peripherals without opening the cabinet, which helps preserve the enclosure layout around the rear electronics.

A rectangular panel cutout of 138 x 173 mm centers the unit and allows quick replacement when the front assembly is removed from the door. The rear section carries a protection level of IP20, which is suitable once the device is installed in a sealed cabinet or control panel. Networking is handled by 2 Ethernet ports on RJ45 jacks, allowing control traffic and plant communication to be separated at the operator station. Legacy controllers can still be reached over an RS-232 channel that terminates on a 9-pin D-sub connector, and the integrated power path is protected by a 16 A fuse to limit fault current inside the unit.